TLC085AIDR
| Parameters | |
|---|---|
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 4 |
| Supply Voltage | 5V |
| Terminal Pitch | 1.27mm |
| Base Part Number | TLC085 |
| Pin Count | 16 |
| Operating Supply Voltage | 8V |
| Number of Elements | 4 |
| Operating Supply Current | 1.9mA |
| Nominal Supply Current | 11.6mA |
| Power Dissipation | 1.09W |
| Output Current | 57mA |
| Slew Rate | 19V/μs |
| Architecture | VOLTAGE-FEEDBACK |
| Amplifier Type | General Purpose |
| Common Mode Rejection Ratio | 80 dB |
| Current - Input Bias | 2pA |
| Voltage - Supply, Single/Dual (±) | 4.5V~16V ±2.25V~8V |
| Output Current per Channel | 57mA |
| Input Offset Voltage (Vos) | 1.4mV |
| Bandwidth | 10MHz |
| Unity Gain BW-Nom | 10000 kHz |
| Voltage Gain | 120dB |
| Average Bias Current-Max (IIB) | 0.0007μA |
| Low-Offset | NO |
| Frequency Compensation | YES |
| Supply Voltage Limit-Max | 17V |
| Voltage - Input Offset | 390μV |
| Low-Bias | YES |
| Micropower | NO |
| Bias Current-Max (IIB) @25C | 0.00005μA |
| Programmable Power | NO |
| Nominal Gain Bandwidth Product | 10MHz |
| Max I/O Voltage | 1.4mV |
| Input Offset Current-Max (IIO) | 0.00005μA |
| Height | 1.75mm |
| Length | 9.9mm |
| Width | 3.91mm |
| Thickness | 1.58mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 2 days ago) |
| Mounting Type | Surface Mount |
| Package / Case | 16-SOIC (0.154, 3.90mm Width) |
| Surface Mount | YES |
| Number of Pins | 16 |
| Operating Temperature | -40°C~125°C |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 16 |
| ECCN Code | EAR99 |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Subcategory | Operational Amplifier |
| Packing Method | TR |
| Technology | BIMOS |
TLC085AIDR Overview
There is a 16-SOIC (0.154, 3.90mm Width) case package that contains the instrumentation amplifiers. An op amp ic of the General Purpose type. It comes in a Tape & Reel (TR) case, which protects instrumentation amplifier from damage during delivery. A total of 16 terminations have been reported in the past few weeks. A total of 16 pins are located on this board. The linear amplifier should be run at 5V at all times, so please keep that in mind when using it. There are two types of Operational Amplifier op amps in this case, and this device falls into one of them. In total, the buffer amplifier consists of 16 pins. As far as the input offset voltage is concerned, linear amplifier rates at 1.4mV. For this electronic part, it is recommended that you mount it with type Surface Mount. It is important to note that this linear amplifier works well at a temperature of -40°C~125°C when it comes to operating temperatureOperational amplifier can operate supply current at 1.9mA. There should be no change in the voltage gain. There are 4 elements in total in this linear amplifier. The operating supply voltage of instrumentation amplifier is rated 8V voltage. This linear amplifier pack is based on the TR axis.
TLC085AIDR Features
16 Pins
supply voltage of 5V
120dB voltage gain
TLC085AIDR Applications
There are a lot of Texas Instruments TLC085AIDR Instrumentational OP Amps applications.
- Blood pressure sensors
- Polarized electrodes
- Scintillation detectors
- Comparator
- Band-stop filter
- Instrumentation
- Active probe
- Precision measurement
- Displayers for aircraft and air transportation control systems
- Computer workstations
