TLC085CN
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 1 week ago) |
| Mounting Type | Through Hole |
| Package / Case | 16-DIP (0.300, 7.62mm) |
| Surface Mount | NO |
| Number of Pins | 16 |
| Operating Temperature | 0°C~70°C |
| Packaging | Tube |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 16 |
| ECCN Code | EAR99 |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Subcategory | Operational Amplifier |
| Technology | BIMOS |
| Terminal Position | DUAL |
| Number of Functions | 4 |
| Supply Voltage | 5V |
| Base Part Number | TLC085 |
| Pin Count | 16 |
| Operating Supply Voltage | 8V |
| Number of Circuits | 4 |
| Operating Supply Current | 1.9mA |
| Nominal Supply Current | 11.6mA |
| Output Current | 57mA |
| Slew Rate | 19V/μs |
| Architecture | VOLTAGE-FEEDBACK |
| Amplifier Type | General Purpose |
| Common Mode Rejection Ratio | 80 dB |
| Current - Input Bias | 2pA |
| Voltage - Supply, Single/Dual (±) | 4.5V~16V ±2.25V~8V |
| Output Current per Channel | 57mA |
| Input Offset Voltage (Vos) | 390μV |
| Bandwidth | 10MHz |
| Unity Gain BW-Nom | 10000 kHz |
| Voltage Gain | 120dB |
| Average Bias Current-Max (IIB) | 0.0001μA |
| Low-Offset | NO |
| Frequency Compensation | YES |
| Supply Voltage Limit-Max | 17V |
| Low-Bias | YES |
| Micropower | NO |
| Bias Current-Max (IIB) @25C | 0.00005μA |
| Programmable Power | NO |
| Nominal Gain Bandwidth Product | 10MHz |
| Max I/O Voltage | 1.9mV |
| Power | NO |
| Input Offset Current-Max (IIO) | 0.00005μA |
| Height | 5.08mm |
| Length | 19.3mm |
| Width | 6.35mm |
| Thickness | 3.9mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
TLC085CN Overview
In the package, you will find a 16-DIP (0.300, 7.62mm)-case to contain the op amp ic. An op amp of this type is a General Purpose-type. In the case of Tube cases, linear amplifier will be delivered. There is a growing number of terminations approaching the number of 16. The pins on this board total to 16 in total. It would be helpful if you could remember that this op amp ic should be powered by an 5V battery. There are two types of Operational Amplifier op amps in this case, and this device falls into one of them. The op amp ic has an array of 16 pins on it. There is an input offset voltage of 390μV for this buffer op amp. The mounting type that is recommended for this electrical part is Through Hole. In terms of operating temperature, this instrumentation amplifier performs well at a temperature of about 0°C~70°C . Using an 1.9mA supply current, this operational amplifier ics can be operated. 120dB should remain the voltage gain. During the manufacturing process, this buffer amplifier is divided into 4 circuits. The operating supply voltage of instrumentation amplifier is rated 8V voltage.
TLC085CN Features
16 Pins
supply voltage of 5V
120dB voltage gain
TLC085CN Applications
There are a lot of Texas Instruments TLC085CN Instrumentational OP Amps applications.
- Displayers for aircraft and air transportation control systems
- Medical imaging
- Exponential operation circuits
- Cinema or auditorium audio system
- Gaming industry
- Automotive sensors
- Proportional operation circuits
- Switching amplifier
- Semiconductor detectors
- High-frequency data acquisition systems
