TLC1078CD
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 6 days ago) |
| Mounting Type | Surface Mount |
| Package / Case | 8-SOIC (0.154, 3.90mm Width) |
| Surface Mount | YES |
| Number of Pins | 8 |
| Operating Temperature | 0°C~70°C |
| Packaging | Tube |
| Series | LinCMOS™ |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Subcategory | Operational Amplifier |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 2 |
| Supply Voltage | 5V |
| Base Part Number | TLC1078 |
| Pin Count | 8 |
| Power Supplies | 5/10V |
| Number of Channels | 2 |
| Operating Supply Current | 29μA |
| Nominal Supply Current | 46μA |
| Power Dissipation | 725mW |
| Output Current | 20mA |
| Slew Rate | 0.047V/μs |
| Architecture | VOLTAGE-FEEDBACK |
| Amplifier Type | General Purpose |
| Common Mode Rejection Ratio | 70 dB |
| Current - Input Bias | 0.7pA |
| Voltage - Supply, Single/Dual (±) | 1.4V~16V |
| Output Current per Channel | 30mA |
| Input Offset Voltage (Vos) | 450μV |
| Bandwidth | 110 kHz |
| Unity Gain BW-Nom | 85 kHz |
| Voltage Gain | 114.4dB |
| Average Bias Current-Max (IIB) | 0.00006μA |
| Low-Offset | YES |
| Frequency Compensation | YES |
| Voltage - Input Offset | 180μV |
| Low-Bias | YES |
| Micropower | YES |
| Bias Current-Max (IIB) @25C | 0.00006μA |
| Programmable Power | NO |
| Nominal Gain Bandwidth Product | 85 kHz |
| Max I/O Voltage | 450μV |
| Input Offset Current-Max (IIO) | 0.00006μA |
| Height | 1.75mm |
| Length | 4.9mm |
| Width | 3.91mm |
| Thickness | 1.58mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
TLC1078CD Overview
The linear amplifier is packaged in a 8-SOIC (0.154, 3.90mm Width) case which makes it easy for the consumer to handle. A General Purpose-type buffer amplifier is shown here. A Tube case is used to deliver the buffer op amp. In recent months, the number of terminations has approached 8. The total number of pins on linear amplifier is 8. As a reminder, this buffer op amp should be powered by 5V battery and that the battery should be inserted in the amplifier. It should be noted that this op amp is a type of Operational Amplifier device. In total, the buffer amplifier consists of 8 pins. Op amp rates 450μV as input offset voltage. The mounting type that is recommended for this electrical part is Surface Mount. With regard to operating temperature, op amp ranges 0°C~70°C. Using a supply current of 29μA , this buffer op amp will be able to operate. It is recommended to keep the voltage gain at 114.4dB at all times. As far as the device is concerned, buffer amplifier has 2 channels. In this case, LinCMOS? represents the instrumentation amplifiers' series number.
TLC1078CD Features
8 Pins
supply voltage of 5V
114.4dB voltage gain
TLC1078CD Applications
There are a lot of Texas Instruments TLC1078CD Instrumentational OP Amps applications.
- Industrial applications including automation
- Wireless base stations
- Addition operation circuits
- ECG equipment
- E-book readers
- single/dual op amp sum and difference circuits
- Non-polarized electrodes
- Portable docking station
- Power generator
- Tablets
