TLC1078CDR
| Parameters | |
|---|---|
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 2 |
| Supply Voltage | 5V |
| Base Part Number | TLC1078 |
| Pin Count | 8 |
| Number of Elements | 2 |
| Power Supplies | 5/10V |
| Operating Supply Current | 29μA |
| Nominal Supply Current | 46μA |
| Power Dissipation | 725mW |
| Output Current | 20mA |
| Slew Rate | 0.047V/μs |
| Architecture | VOLTAGE-FEEDBACK |
| Amplifier Type | General Purpose |
| Common Mode Rejection Ratio | 70 dB |
| Current - Input Bias | 0.7pA |
| Voltage - Supply, Single/Dual (±) | 1.4V~16V |
| Output Current per Channel | 30mA |
| Input Offset Voltage (Vos) | 450μV |
| Bandwidth | 110 kHz |
| Unity Gain BW-Nom | 85 kHz |
| Voltage Gain | 114.4dB |
| Average Bias Current-Max (IIB) | 0.00006μA |
| Low-Offset | YES |
| Frequency Compensation | YES |
| Voltage - Input Offset | 180μV |
| Low-Bias | YES |
| Micropower | YES |
| Bias Current-Max (IIB) @25C | 0.00006μA |
| Programmable Power | NO |
| Nominal Gain Bandwidth Product | 85 kHz |
| Max I/O Voltage | 450μV |
| Input Offset Current-Max (IIO) | 0.00006μA |
| Height | 1.75mm |
| Length | 4.9mm |
| Width | 3.91mm |
| Thickness | 1.58mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 5 days ago) |
| Mounting Type | Surface Mount |
| Package / Case | 8-SOIC (0.154, 3.90mm Width) |
| Surface Mount | YES |
| Number of Pins | 8 |
| Operating Temperature | 0°C~70°C |
| Packaging | Tape & Reel (TR) |
| Series | LinCMOS™ |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Subcategory | Operational Amplifier |
| Packing Method | TR |
TLC1078CDR Overview
Packaged in a 8-SOIC (0.154, 3.90mm Width) case, the buffer op amp is ready to use. This is a General Purpose type op amp. Instrumentation amplifier is delivered in a Tape & Reel (TR) case. The number of terminations is approaching the 8 mark. Buffer amplifier has a total of 8 pins. I would like you to keep in mind that this buffer amplifier needs to be run at a voltage of 5V. To be specific, this instrumentation amplifier is a type of Operational Amplifier. 8 pins are available on the instrumentation amplifier. Regarding input offset voltage, op amp rates 450μV. Surface Mount is the recommended mounting type of operational amplifiers. The buffer amplifier functions well at 0°C~70°C as far as operating temperature is concerned. In order for this instrumentation amplifier to operate, the supply current needs to be between 29μA and 10 . Keeping the voltage gain at 114.4dB is the best course of action. The total number of elements in this buffer amplifier is 2. For packing the buffer amplifier, the TR-axis is adopted. Instrumentation amplifiers are numbered by their LinCMOS? series.
TLC1078CDR Features
8 Pins
supply voltage of 5V
114.4dB voltage gain
TLC1078CDR Applications
There are a lot of Texas Instruments TLC1078CDR Instrumentational OP Amps applications.
- Automotive sensors
- single/dual op amp sum and difference circuits
- Information processing
- Test and measurement instruments
- Scintillation detectors
- Voltage regulation circuit
- Multimedia playback equipment
- Video computer boards
- RF cable systems
- Switching amplifier
