TLC1078IP
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 6 days ago) |
| Mounting Type | Through Hole |
| Package / Case | 8-DIP (0.300, 7.62mm) |
| Surface Mount | NO |
| Number of Pins | 8 |
| Operating Temperature | -40°C~85°C |
| Packaging | Tube |
| Series | LinCMOS™ |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Subcategory | Operational Amplifier |
| Terminal Position | DUAL |
| Number of Functions | 2 |
| Supply Voltage | 5V |
| Base Part Number | TLC1078 |
| Pin Count | 8 |
| Number of Elements | 2 |
| Power Supplies | 5/10V |
| Operating Supply Current | 29μA |
| Nominal Supply Current | 46μA |
| Power Dissipation | 1W |
| Output Current | 20mA |
| Slew Rate | 0.047V/μs |
| Architecture | VOLTAGE-FEEDBACK |
| Amplifier Type | General Purpose |
| Common Mode Rejection Ratio | 70 dB |
| Current - Input Bias | 0.7pA |
| Voltage - Supply, Single/Dual (±) | 3V~16V |
| Output Current per Channel | 30mA |
| Input Offset Voltage (Vos) | 450μV |
| Bandwidth | 110 kHz |
| Unity Gain BW-Nom | 85 kHz |
| Voltage Gain | 114.4dB |
| Average Bias Current-Max (IIB) | 0.00006μA |
| Low-Offset | NO |
| Frequency Compensation | YES |
| Voltage - Input Offset | 180μV |
| Low-Bias | YES |
| Micropower | YES |
| Bias Current-Max (IIB) @25C | 0.00006μA |
| Programmable Power | NO |
| Nominal Gain Bandwidth Product | 85 kHz |
| Max I/O Voltage | 450μV |
| Input Offset Current-Max (IIO) | 0.00006μA |
| Height | 5.08mm |
| Length | 9.81mm |
| Width | 6.35mm |
| Thickness | 3.9mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
TLC1078IP Overview
In order to protect the op amps, a 8-DIP (0.300, 7.62mm) case is used. This is a General Purpose type op amp. Linear amplifier is delivered in a Tube case. The number of terminations approaches 8. In this case, there are 8 pins on the board. I would like you to keep in mind that this buffer amplifier needs to be run at a voltage of 5V. In more specific terms, this linear amplifier can be categoriOperational Amplifiered as a Operational Amplifier-type device. 8 pins are included on the operational amplifiers. Regarding input offset voltage, op amp rates 450μV. This electronic part is best mounted with type Through Hole. It is important to note that this linear amplifier works well at a temperature of -40°C~85°C when it comes to operating temperatureUsing a supply current of 29μA , this buffer op amp will be able to operate. Voltage gain should remain at 114.4dB. 2 elements make up the design of this buffer amplifier. This buffer amplifier is assigned within the LinCMOS? series by its manufacturer.
TLC1078IP Features
8 Pins
supply voltage of 5V
114.4dB voltage gain
TLC1078IP Applications
There are a lot of Texas Instruments TLC1078IP Instrumentational OP Amps applications.
- Power control
- Radar
- Division circuits
- ECG equipment
- Industrial applications including automation
- Portable media players
- High/low-pass filter circuit
- Power transmission
- Medical imaging
- Television
