TLC1078MDG4
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 1 week ago) |
| Mounting Type | Surface Mount |
| Package / Case | 8-SOIC (0.154, 3.90mm Width) |
| Surface Mount | YES |
| Number of Pins | 8 |
| Operating Temperature | -55°C~125°C |
| Packaging | Tube |
| Series | LinCMOS™ |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Subcategory | Operational Amplifier |
| Packing Method | TR |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 2 |
| Supply Voltage | 5V |
| Base Part Number | TLC1078 |
| Pin Count | 8 |
| Power Supplies | 5/10V |
| Number of Circuits | 2 |
| Operating Supply Current | 29μA |
| Nominal Supply Current | 46μA |
| Output Current | 20mA |
| Slew Rate | 0.047V/μs |
| Architecture | VOLTAGE-FEEDBACK |
| Amplifier Type | General Purpose |
| Common Mode Rejection Ratio | 70 dB |
| Current - Input Bias | 0.7pA |
| Voltage - Supply, Single/Dual (±) | 4V~16V |
| Output Current per Channel | 30mA |
| Input Offset Voltage (Vos) | 180μV |
| Bandwidth | 110 kHz |
| Unity Gain BW-Nom | 85 kHz |
| Voltage Gain | 114.4dB |
| Average Bias Current-Max (IIB) | 0.00006μA |
| Low-Offset | NO |
| Frequency Compensation | YES |
| Low-Bias | YES |
| Micropower | YES |
| Bias Current-Max (IIB) @25C | 0.00006μA |
| Programmable Power | NO |
| Nominal Gain Bandwidth Product | 85 kHz |
| Max I/O Voltage | 450μV |
| Power | NO |
| Input Offset Current-Max (IIO) | 0.00006μA |
| Height | 1.75mm |
| Length | 4.9mm |
| Width | 3.91mm |
| Thickness | 1.58mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
TLC1078MDG4 Overview
In the package, you will find a 8-SOIC (0.154, 3.90mm Width)-case to contain the op amp ic. An op amp of this type is a General Purpose-type. As far as the packaging is concerned, buffer op amp is delivered in a Tube case. The number of terminations approaches 8. The pins on this board total to 8 in total. Please take in mind that op amp should be run at 5V. In order to be more specific, this instrumentation amplifier is one of the types of Operational Amplifier devices. 8 pins are located on the operational amplifiers. As far as the input offset voltage is concerned, linear amplifier rates at 180μV. This electronic part is recommended for mounting type Surface Mount. In terms of operating temperature, this instrumentation amplifier performs well at a temperature of about -55°C~125°C . In order for this instrumentation amplifier to operate, the supply current needs to be between 29μA and 10 . 114.4dB should be the voltage gain. A instrumentation amplifier like this has 2 circuits. An buffer amplifier is packed in a TR-shape according to the design. LinCMOS? corresponds to linear amplifier's series.
TLC1078MDG4 Features
8 Pins
supply voltage of 5V
114.4dB voltage gain
TLC1078MDG4 Applications
There are a lot of Texas Instruments TLC1078MDG4 Instrumentational OP Amps applications.
- Industrial control system
- Polarized electrodes
- High speed sample
- Video computer boards
- Signal transformation
- Multiplication circuits
- Multimedia playback equipment
- Strain gauges
- High/low-pass filter circuit
- Active probe
