TLC1079CN
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 6 days ago) |
| Mounting Type | Through Hole |
| Package / Case | 14-DIP (0.300, 7.62mm) |
| Number of Pins | 14 |
| Supplier Device Package | 14-PDIP |
| Operating Temperature | 0°C~70°C |
| Packaging | Tube |
| Series | LinCMOS™ |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Max Operating Temperature | 70°C |
| Min Operating Temperature | 0°C |
| Base Part Number | TLC1079 |
| Number of Elements | 4 |
| Number of Channels | 4 |
| Number of Circuits | 4 |
| Max Supply Voltage | 16V |
| Min Supply Voltage | 1.4V |
| Operating Supply Current | 57μA |
| Nominal Supply Current | 92μA |
| Power Dissipation | 1.15W |
| Output Current | 20mA |
| Current - Supply | 57μA |
| Slew Rate | 0.047V/μs |
| Amplifier Type | General Purpose |
| Common Mode Rejection Ratio | 70 dB |
| Current - Input Bias | 0.7pA |
| Voltage - Supply, Single/Dual (±) | 1.4V~16V |
| Output Current per Channel | 30mA |
| Input Offset Voltage (Vos) | 850μV |
| Bandwidth | 110 kHz |
| Gain Bandwidth Product | 110kHz |
| Voltage Gain | 114.4dB |
| Voltage - Input Offset | 200μV |
| Current - Output / Channel | 30mA |
| Nominal Gain Bandwidth Product | 85 kHz |
| Max I/O Voltage | 850μV |
| Number of Amplifiers | 4 |
| Height | 5.08mm |
| Length | 19.3mm |
| Width | 6.35mm |
| Thickness | 3.9mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
TLC1079CN Overview
There is a 14-DIP (0.300, 7.62mm) case package that contains the instrumentation amplifiers. Buffer amps of this type are called General Purpose-types. A Tube case is used to deliver the buffer op amp. A total of 14 pins are present on the instrumentation amplifier. There is an input offset voltage of 850μV for this buffer op amp. For this electronic part, it is recommended that you mount it with type Through Hole. It is recommended that this op amp ic be operated at a temperature no higher than 0°C~70°C for optimal performance. Using a supply current of 57μA , this buffer op amp will be able to operate. Voltage gain should remain at 114.4dB. There are 4 circuits on this op amp. The op amp ic has 4 channels on it. In order for this buffer op amp to function, it should have a temperature of at least 0°C degrees Celsius. You should only use instrumentation amplifier at temperatures that are no higher than 70°C. According to the specifications of the buffer op amp, the operating supply voltage is rated at 4. As a recommendation, this electronic component should be used with a power supply that can deliver 57μA. With regard to the supply voltage, this electrical component is capable of working from under 16V. It is recommended that you keep the instrumentation amplifier's supply voltage higher than 1.4V when using it. The LinCMOS? indicates the series number of the op amp. There are 4 amplifiers on the op amp.
TLC1079CN Features
114.4dB voltage gain
TLC1079CN Applications
There are a lot of Texas Instruments TLC1079CN Instrumentational OP Amps applications.
- Multimedia playback equipment
- RF cable systems
- Automatic control
- High-frequency data acquisition systems
- Information processing
- Television broadcasting equipment
- Radar
- Displayers for aircraft and air transportation control systems
- Large motor controllers
- Communication device
