TLC1079ID
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 6 days ago) |
| Mounting Type | Surface Mount |
| Package / Case | 14-SOIC (0.154, 3.90mm Width) |
| Surface Mount | YES |
| Number of Pins | 14 |
| Operating Temperature | -40°C~85°C |
| Packaging | Tube |
| Series | LinCMOS™ |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 14 |
| ECCN Code | EAR99 |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Subcategory | Operational Amplifier |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 4 |
| Supply Voltage | 5V |
| Terminal Pitch | 1.27mm |
| Base Part Number | TLC1079 |
| Pin Count | 14 |
| Number of Elements | 4 |
| Power Supplies | 5/10V |
| Operating Supply Current | 57μA |
| Nominal Supply Current | 92μA |
| Power Dissipation | 950mW |
| Output Current | 20mA |
| Slew Rate | 0.047V/μs |
| Architecture | VOLTAGE-FEEDBACK |
| Amplifier Type | General Purpose |
| Common Mode Rejection Ratio | 70 dB |
| Current - Input Bias | 0.7pA |
| Voltage - Supply, Single/Dual (±) | 3V~16V |
| Output Current per Channel | 30mA |
| Input Offset Voltage (Vos) | 850μV |
| Bandwidth | 110 kHz |
| Unity Gain BW-Nom | 85 kHz |
| Voltage Gain | 114.4dB |
| Average Bias Current-Max (IIB) | 0.00006μA |
| Low-Offset | NO |
| Frequency Compensation | YES |
| Supply Voltage Limit-Max | 18V |
| Voltage - Input Offset | 200μV |
| Low-Bias | YES |
| Micropower | YES |
| Bias Current-Max (IIB) @25C | 0.00006μA |
| Programmable Power | NO |
| Nominal Gain Bandwidth Product | 85 kHz |
| Max I/O Voltage | 850μV |
| Input Offset Current-Max (IIO) | 0.00006μA |
| Height | 1.75mm |
| Length | 8.65mm |
| Width | 3.91mm |
| Thickness | 1.58mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
TLC1079ID Overview
It is packaged in an 14-SOIC (0.154, 3.90mm Width)-case that protects the operational amplifiers from damage. Buffer amps of this type are called General Purpose-types. The op amp is delivered to you in a Tube case. During the past two weeks, there have been close to 14 terminations. Linear amplifier has a total of 14 pins. As a reminder, this buffer op amp should be powered by 5V battery and that the battery should be inserted in the amplifier. To be specific, this instrumentation amplifier is a type of Operational Amplifier. An 14-pin op amp ic is included in the package. As far as the input offset voltage is concerned, linear amplifier rates at 850μV. For this electronic part, it is recommended that you mount it with type Surface Mount. The buffer amplifier functions well at -40°C~85°C as far as operating temperature is concerned. Using a supply current of 57μA , this buffer op amp will be able to operate. Maintain 114.4dB as the voltage gain. Op amp has total of 4 elements. Instrumentation amplifiers are numbered by their LinCMOS? series.
TLC1079ID Features
14 Pins
supply voltage of 5V
114.4dB voltage gain
TLC1079ID Applications
There are a lot of Texas Instruments TLC1079ID Instrumentational OP Amps applications.
- Television broadcasting equipment
- Signal amplification
- Navigation
- High speed sample
- Industrial control system
- Medical instruments
- Information processing
- Power control
- Exponential operation circuits
- Automatic control
