TLC2201AID

1 Channels 50mA per Channel 1pA 90 dB Instrumentational OP Amps 8V 4.6V~16V ±2.3V~8V TLC2201 8 Pins 8-SOIC (0.154, 3.90mm Width)

Manufacturer: Texas Instruments
Nocochips NO: 815-TLC2201AID
Package: 8-SOIC (0.154, 3.90mm Width)
Datasheet: -
Stock: 859
Description: 1 Channels 50mA per Channel 1pA 90 dB Instrumentational OP Amps 8V 4.6V~16V ±2.3V~8V TLC2201 8 Pins 8-SOIC (0.154, 3.90mm Width)(Kg)

Inquiry Now

Details

Tags

Parameters
Factory Lead Time	1 Week
Lifecycle Status	ACTIVE (Last Updated: 2 days ago)
Mounting Type	Surface Mount
Package / Case	8-SOIC (0.154, 3.90mm Width)
Surface Mount	YES
Number of Pins	8
Operating Temperature	-40°C~85°C
Packaging	Tube
Series	LinCMOS™
JESD-609 Code	e4
Pbfree Code	yes
Part Status	Active
Moisture Sensitivity Level (MSL)	1 (Unlimited)
Number of Terminations	8
ECCN Code	EAR99
Terminal Finish	Nickel/Palladium/Gold (Ni/Pd/Au)
Subcategory	Operational Amplifier
Terminal Position	DUAL
Terminal Form	GULL WING
Peak Reflow Temperature (Cel)	260
Number of Functions	1
Supply Voltage	5V
Base Part Number	TLC2201
Pin Count	8
Output Type	Rail-to-Rail
Operating Supply Voltage	8V
Number of Channels	1
Operating Supply Current	1.1mA
Nominal Supply Current	1.5mA
Power Dissipation	725mW
Output Current	50mA
Slew Rate	2.7V/μs
Architecture	VOLTAGE-FEEDBACK
Amplifier Type	General Purpose
Common Mode Rejection Ratio	90 dB
Current - Input Bias	1pA
Voltage - Supply, Single/Dual (±)	4.6V~16V ±2.3V~8V
Output Current per Channel	50mA
Input Offset Voltage (Vos)	200μV
Bandwidth	1.9MHz
Neg Supply Voltage-Nom (Vsup)	-5V
Unity Gain BW-Nom	1900 kHz
Voltage Gain	109.97dB
Low-Offset	YES
Frequency Compensation	YES
Supply Voltage Limit-Max	8V
Voltage - Input Offset	80μV
Low-Bias	YES
Micropower	NO
Programmable Power	NO
Dual Supply Voltage	5V
Nominal Gain Bandwidth Product	1.9MHz
Max I/O Voltage	200μV
Input Offset Current-Max (IIO)	0.00006μA
Height	1.75mm
Length	4.9mm
Width	3.91mm
Thickness	1.58mm
Radiation Hardening	No
REACH SVHC	No SVHC
RoHS Status	ROHS3 Compliant
Lead Free	Lead Free

TLC2201AID Overview

Op amp is packaged in 8-SOIC (0.154, 3.90mm Width) case. An op amp of this type is a General Purpose-type. It comes in a Tube case, which protects instrumentation amplifier from damage during delivery. There is a growing number of terminations approaching the number of 8. The total number of pins on linear amplifier is 8. The linear amplifier should be run at 5V at all times, so please keep that in mind when using it. A type of Operational Amplifier op amp ic can be identified by the fact that this is a type of Operational Amplifier device. A total of 8 pins are present on the instrumentation amplifier. Regarding input offset voltage, op amp rates 200μV. Surface Mount is the recommended mounting type for this linear amplifier. It is recommended that this op amp ic be operated at a temperature no higher than -40°C~85°C for optimal performance. An 1.1mA volt supply current is needed for this linear amplifier to operate. 109.97dB should remain the voltage gain. On the buffer amps, there are 1 channels that can be used. There are more than a few advantages to using this instrumentation amplifier, one of which is that it outputs Rail-to-Rail signals. The operating supply voltage of instrumentation amplifier is rated 8V voltage. The LinCMOS? stands for the buffer op amp's serial number.