Parameters |
Surface Mount |
YES |
Number of Pins |
8 |
Operating Temperature |
-55°C~125°C |
Packaging |
Tube |
Series |
LinCMOS™ |
JESD-609 Code |
e4 |
Pbfree Code |
yes |
Part Status |
Active |
Moisture Sensitivity Level (MSL) |
1 (Unlimited) |
Number of Terminations |
8 |
ECCN Code |
EAR99 |
Terminal Finish |
Nickel/Palladium/Gold (Ni/Pd/Au) |
Subcategory |
Operational Amplifier |
Packing Method |
TR |
Terminal Position |
DUAL |
Terminal Form |
GULL WING |
Peak Reflow Temperature (Cel) |
260 |
Number of Functions |
1 |
Supply Voltage |
5V |
Base Part Number |
TLC2201 |
Pin Count |
8 |
Output Type |
Rail-to-Rail |
Operating Supply Voltage |
8V |
Number of Elements |
1 |
Operating Supply Current |
1.1mA |
Nominal Supply Current |
1.5mA |
Power Dissipation |
725mW |
Output Current |
50mA |
Slew Rate |
2.7V/μs |
Architecture |
VOLTAGE-FEEDBACK |
Amplifier Type |
General Purpose |
Common Mode Rejection Ratio |
90 dB |
Current - Input Bias |
1pA |
Voltage - Supply, Single/Dual (±) |
4.6V~16V ±2.3V~8V |
Output Current per Channel |
50mA |
Input Offset Voltage (Vos) |
200μV |
Bandwidth |
1.9MHz |
Neg Supply Voltage-Nom (Vsup) |
-5V |
Unity Gain BW-Nom |
1800 kHz |
Voltage Gain |
109.97dB |
Average Bias Current-Max (IIB) |
0.00006μA |
Low-Offset |
YES |
Frequency Compensation |
YES |
Supply Voltage Limit-Max |
8V |
Voltage - Input Offset |
80μV |
Low-Bias |
YES |
Micropower |
NO |
Bias Current-Max (IIB) @25C |
0.0005μA |
Programmable Power |
NO |
Nominal Gain Bandwidth Product |
1.9MHz |
Max I/O Voltage |
200μV |
Input Offset Current-Max (IIO) |
0.00006μA |
Height |
1.75mm |
Length |
4.9mm |
Width |
3.91mm |
Thickness |
1.58mm |
Radiation Hardening |
No |
RoHS Status |
ROHS3 Compliant |
Lead Free |
Lead Free |
Factory Lead Time |
1 Week |
Lifecycle Status |
ACTIVE (Last Updated: 1 day ago) |
Mounting Type |
Surface Mount |
Package / Case |
8-SOIC (0.154, 3.90mm Width) |
TLC2201AMDG4 Overview
Packaged in a 8-SOIC (0.154, 3.90mm Width) case, the buffer op amp is ready to use. There are two types of operational amplifiers in this circuit. Instrumentation amplifier is delivered in a Tube case. There have been a total of 8 terminations over the past year. In this case, there are 8 pins on the board. Please take in mind that this instrumentation amplifier should be run at 5V. A type of Operational Amplifier op amp ic can be identified by the fact that this is a type of Operational Amplifier device. Linear amplifier includes 8 pins. With regard to input offset voltage, instrumentation amplifier is rated at 200μV. Surface Mount is the recommended mounting type for this linear amplifier. In terms of operating temperatures, this buffer amplifier works very well at a temperature of around -55°C~125°C . The buffer amplifier is capable of operating from a supply current of 1.1mA . Maintain 109.97dB as the voltage gain. Buffer amplifier produces Rail-to-Rail signals, which is one of its many benefits. According to the specifications of the buffer op amp, the operating supply voltage is rated at 1. The operating supply voltage of instrumentation amplifier is rated 8V voltage. The instrumentation amplifier is packed in the form of TR. LinCMOS? is the number that corresponds to the series of the buffer op amp.
TLC2201AMDG4 Features
8 Pins
supply voltage of 5V
109.97dB voltage gain
Output Type: Rail-to-Rail
TLC2201AMDG4 Applications
There are a lot of Texas Instruments TLC2201AMDG4 Instrumentational OP Amps applications.
- Industrial control system
- Gaming industry
- Communication device
- Power transmission
- Inverse/same-phase proportional circuit
- Home audio systems
- High input resistance broadband
- Television broadcasting equipment
- Fast A/D and D/A converters
- Exponential operation circuits