Parameters |
Factory Lead Time |
1 Week |
Lifecycle Status |
ACTIVE (Last Updated: 2 days ago) |
Mounting Type |
Through Hole |
Package / Case |
8-DIP (0.300, 7.62mm) |
Surface Mount |
NO |
Number of Pins |
8 |
Operating Temperature |
-40°C~85°C |
Packaging |
Tube |
Series |
LinCMOS™ |
JESD-609 Code |
e4 |
Pbfree Code |
yes |
Part Status |
Active |
Moisture Sensitivity Level (MSL) |
1 (Unlimited) |
Number of Terminations |
8 |
ECCN Code |
EAR99 |
Terminal Finish |
Nickel/Palladium/Gold (Ni/Pd/Au) |
Subcategory |
Operational Amplifier |
Terminal Position |
DUAL |
Peak Reflow Temperature (Cel) |
260 |
Number of Functions |
1 |
Supply Voltage |
5V |
Terminal Pitch |
2.54mm |
Base Part Number |
TLC2201 |
Pin Count |
8 |
Output Type |
Rail-to-Rail |
Operating Supply Voltage |
8V |
Number of Channels |
1 |
Operating Supply Current |
1.1mA |
Nominal Supply Current |
1.5mA |
Power Dissipation |
1W |
Output Current |
50mA |
Slew Rate |
2.7V/μs |
Architecture |
VOLTAGE-FEEDBACK |
Amplifier Type |
General Purpose |
Common Mode Rejection Ratio |
90 dB |
Current - Input Bias |
1pA |
Voltage - Supply, Single/Dual (±) |
4.6V~16V ±2.3V~8V |
Output Current per Channel |
50mA |
Input Offset Voltage (Vos) |
500μV |
Bandwidth |
1.9MHz |
Neg Supply Voltage-Nom (Vsup) |
-5V |
Unity Gain BW-Nom |
1900 kHz |
Voltage Gain |
109.97dB |
Low-Offset |
YES |
Frequency Compensation |
YES |
Supply Voltage Limit-Max |
8V |
Voltage - Input Offset |
100μV |
Low-Bias |
YES |
Micropower |
NO |
Max Frequency |
10kHz |
Programmable Power |
NO |
Nominal Gain Bandwidth Product |
1.9MHz |
Max I/O Voltage |
500μV |
Input Offset Current-Max (IIO) |
0.00006μA |
Height |
5.08mm |
Length |
9.81mm |
Width |
6.35mm |
Thickness |
3.9mm |
Radiation Hardening |
No |
REACH SVHC |
No SVHC |
RoHS Status |
ROHS3 Compliant |
Lead Free |
Lead Free |
TLC2201IP Overview
A 8-DIP (0.300, 7.62mm) case is used to package the op amp. This is a General Purpose type op amp. It comes in a Tube case, which protects instrumentation amplifier from damage during delivery. A total of 8 terminations have been reported in the past few weeks. It consists of a total of 8 pins in total. This linear amplifier should be powered by an 5V battery. To be specific, this instrumentation amplifier is a type of Operational Amplifier. 8 pins are included on the operational amplifiers. With regard to input offset voltage, instrumentation amplifier is rated at 500μV. For this electrical component, Through Hole is the recommended mounting type. In terms of operating temperature, this instrumentation amplifier is well suited to a temperature range of -40°C~85°C. This op amp can operate from a supply current at 1.1mA. You should keep the voltage gain at 109.97dB for the time being. There are a total of 1 channels available on the op amps. There are more than a few advantages to using this instrumentation amplifier, one of which is that it outputs Rail-to-Rail signals. The operating supply voltage of the buffer op amp is rated at 8V. The LinCMOS? stands for the buffer op amp's serial number.
TLC2201IP Features
8 Pins
supply voltage of 5V
109.97dB voltage gain
Output Type: Rail-to-Rail
TLC2201IP Applications
There are a lot of Texas Instruments TLC2201IP Instrumentational OP Amps applications.
- High speed sample
- Signal filtering
- Computer workstations
- Test and measurement instruments
- Ultrasound transducers
- Video computer boards
- Portable media players
- Automatic control
- Weak signal detection
- Automation control systems