TLC2252IP

50mA per Channel 1pA 70 dB Instrumentational OP Amps 0.001μA 8V 4.4V~16V ±2.2V~8V TLC2252 8 Pins 8-DIP (0.300, 7.62mm)

Manufacturer: Texas Instruments
Nocochips NO: 815-TLC2252IP
Package: 8-DIP (0.300, 7.62mm)
Datasheet: -
Stock: 174
Description: 50mA per Channel 1pA 70 dB Instrumentational OP Amps 0.001μA 8V 4.4V~16V ±2.2V~8V TLC2252 8 Pins 8-DIP (0.300, 7.62mm)(Kg)

Details

Tags

Parameters
Factory Lead Time	1 Week
Lifecycle Status	ACTIVE (Last Updated: 3 days ago)
Contact Plating	Gold
Mount	Through Hole
Mounting Type	Through Hole
Package / Case	8-DIP (0.300, 7.62mm)
Number of Pins	8
Operating Temperature	-40°C~125°C
Packaging	Tube
Series	LinCMOS™
JESD-609 Code	e4
Pbfree Code	yes
Part Status	Active
Moisture Sensitivity Level (MSL)	1 (Unlimited)
Number of Terminations	8
ECCN Code	EAR99
Subcategory	Operational Amplifier
Max Power Dissipation	1W
Terminal Position	DUAL
Peak Reflow Temperature (Cel)	260
Number of Functions	2
Supply Voltage	5V
Base Part Number	TLC2252
Pin Count	8
Output Type	Rail-to-Rail
Operating Supply Voltage	8V
Number of Elements	2
Operating Supply Current	80μA
Nominal Supply Current	125μA
Power Dissipation	1W
Output Current	50mA
Slew Rate	0.12V/μs
Architecture	VOLTAGE-FEEDBACK
Amplifier Type	General Purpose
Common Mode Rejection Ratio	70 dB
Current - Input Bias	1pA
Voltage - Supply, Single/Dual (±)	4.4V~16V ±2.2V~8V
Output Current per Channel	50mA
Input Offset Voltage (Vos)	1.5mV
Bandwidth	200 kHz
Gain Bandwidth Product	210kHz
Neg Supply Voltage-Nom (Vsup)	-5V
Unity Gain BW-Nom	200 kHz
Voltage Gain	124.61dB
Average Bias Current-Max (IIB)	0.001μA
Low-Offset	NO
Frequency Compensation	YES
Supply Voltage Limit-Max	8V
Voltage - Input Offset	200μV
Low-Bias	YES
Micropower	YES
Bias Current-Max (IIB) @25C	0.00006μA
Programmable Power	NO
Input Offset Current-Max (IIO)	0.00006μA
Height	5.08mm
Length	9.81mm
Width	6.35mm
Thickness	3.9mm
Radiation Hardening	No
RoHS Status	ROHS3 Compliant
Lead Free	Lead Free

TLC2252IP Overview

Packaging for the buffer amplifier is in the form of a 8-DIP (0.300, 7.62mm) case. General Purpose-type instrumentation amplifiers are used in this application. As far as the packaging is concerned, buffer op amp is delivered in a Tube case. There is a growing number of terminations approaching the number of 8. Buffer amplifier has a total of 8 pins. It is important to remember that this op amp should be operated at a voltage of 5V volts. Instrumentation amplifier is a part of Operational Amplifier. Linear amplifier includes 8 pins. In terms of input offset voltage, operational amplifier rates 1.5mV. The mounting type that is recommended for this electrical part is Through Hole. In terms of operating temperatures, this buffer amplifier works very well at a temperature of around -40°C~125°C . As long as the supply current of the chip does not exceed 80μA, this op amp ic can operate. You should keep the voltage gain at 124.61dB for the time being. Buffer amplifier produces Rail-to-Rail signals, which is one of its many benefits. For the operating supply voltage of the op amp ic, there is a rating of 2. The operating supply voltage of the buffer op amp is rated at 8V. LinCMOS? corresponds to linear amplifier's series.