TLC2254AIN
| Parameters | |
|---|---|
| Unity Gain BW-Nom | 200 kHz |
| Voltage Gain | 124.61dB |
| Average Bias Current-Max (IIB) | 0.001μA |
| Low-Offset | NO |
| Frequency Compensation | YES |
| Supply Voltage Limit-Max | 8V |
| Voltage - Input Offset | 200μV |
| Low-Bias | YES |
| Micropower | YES |
| Bias Current-Max (IIB) @25C | 0.00006μA |
| Programmable Power | NO |
| Nominal Gain Bandwidth Product | 200 kHz |
| Max I/O Voltage | 850μV |
| Input Offset Current-Max (IIO) | 0.00006μA |
| Height | 5.08mm |
| Length | 19.3mm |
| Width | 6.35mm |
| Thickness | 3.9mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 3 days ago) |
| Mounting Type | Through Hole |
| Package / Case | 14-DIP (0.300, 7.62mm) |
| Surface Mount | NO |
| Number of Pins | 14 |
| Operating Temperature | -40°C~125°C |
| Packaging | Tube |
| Series | LinCMOS™ |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 14 |
| ECCN Code | EAR99 |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Subcategory | Operational Amplifier |
| Terminal Position | DUAL |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 4 |
| Supply Voltage | 5V |
| Base Part Number | TLC2254 |
| Pin Count | 14 |
| Output Type | Rail-to-Rail |
| Operating Supply Voltage | 8V |
| Number of Elements | 4 |
| Operating Supply Current | 160μA |
| Nominal Supply Current | 250μA |
| Power Dissipation | 1.15W |
| Output Current | 50mA |
| Slew Rate | 0.12V/μs |
| Architecture | VOLTAGE-FEEDBACK |
| Amplifier Type | General Purpose |
| Common Mode Rejection Ratio | 70 dB |
| Current - Input Bias | 1pA |
| Voltage - Supply, Single/Dual (±) | 4.4V~16V ±2.2V~8V |
| Output Current per Channel | 50mA |
| Input Offset Voltage (Vos) | 850μV |
| Bandwidth | 200 kHz |
| Gain Bandwidth Product | 210kHz |
| Neg Supply Voltage-Nom (Vsup) | -5V |
TLC2254AIN Overview
A 14-DIP (0.300, 7.62mm) case is used to package the op amp. An op amp of this type is a General Purpose-type. Linear amplifier is delivered in a Tube case. In recent months, the number of terminations has approached 14. There are a total of 14 pins on this op amp. I would like to remind you that this buffer op amp should be powered by an 5V battery. It should be noted that this op amp is a type of Operational Amplifier device. There are 14 pins on this chip. Regarding input offset voltage, op amp rates 850μV. For this electrical component, the recommended mounting type is Through Hole, which is the most common. In terms of operating temperatures, this buffer amplifier works very well at a temperature of around -40°C~125°C . An 160μA volt supply current is needed for this linear amplifier to operate. It is a member of the 124.61dB's 124.61dB family. This op amp ic outputs Rail-to-Rail signals, which is one of the many benefits it has. According to the specifications of the buffer op amp, the operating supply voltage is rated at 4. The operating supply voltage of the buffer op amp is rated at 8V. LinCMOS? is the number that corresponds to the series of the buffer op amp.
TLC2254AIN Features
14 Pins
supply voltage of 5V
124.61dB voltage gain
Output Type: Rail-to-Rail
TLC2254AIN Applications
There are a lot of Texas Instruments TLC2254AIN Instrumentational OP Amps applications.
- Portable docking station
- Test and measurement instruments
- High input resistance broadband
- Biopotential
- Industrial applications including automation
- Exponential operation circuits
- Multimedia playback equipment
- Professional videography
- Large motor controllers
- Micro signal measurement
