TLC2254AQD

50mA per Channel 1pA 70 dB Instrumentational OP Amps 0.001μA 8V 4.4V~16V ±2.2V~8V TLC2254 14 Pins 14-SOIC (0.154, 3.90mm Width)

Manufacturer: Texas Instruments
Nocochips NO: 815-TLC2254AQD
Package: 14-SOIC (0.154, 3.90mm Width)
Datasheet: -
Stock: 280
Description: 50mA per Channel 1pA 70 dB Instrumentational OP Amps 0.001μA 8V 4.4V~16V ±2.2V~8V TLC2254 14 Pins 14-SOIC (0.154, 3.90mm Width)(Kg)

Inquiry Now

Details

Tags

Parameters
Factory Lead Time	1 Week
Lifecycle Status	ACTIVE (Last Updated: 3 days ago)
Mounting Type	Surface Mount
Package / Case	14-SOIC (0.154, 3.90mm Width)
Surface Mount	YES
Number of Pins	14
Operating Temperature	-40°C~125°C
Packaging	Tube
Series	LinCMOS™
JESD-609 Code	e4
Pbfree Code	yes
Part Status	Active
Moisture Sensitivity Level (MSL)	1 (Unlimited)
Number of Terminations	14
ECCN Code	EAR99
Terminal Finish	Nickel/Palladium/Gold (Ni/Pd/Au)
Subcategory	Operational Amplifier
Packing Method	TR
Terminal Position	DUAL
Terminal Form	GULL WING
Peak Reflow Temperature (Cel)	260
Number of Functions	4
Supply Voltage	5V
Terminal Pitch	1.27mm
Base Part Number	TLC2254
Pin Count	14
Output Type	Rail-to-Rail
Operating Supply Voltage	8V
Number of Circuits	4
Operating Supply Current	160μA
Nominal Supply Current	250μA
Output Current	50mA
Slew Rate	0.12V/μs
Architecture	VOLTAGE-FEEDBACK
Amplifier Type	General Purpose
Common Mode Rejection Ratio	70 dB
Current - Input Bias	1pA
Voltage - Supply, Single/Dual (±)	4.4V~16V ±2.2V~8V
Output Current per Channel	50mA
Input Offset Voltage (Vos)	200μV
Bandwidth	200 kHz
Gain Bandwidth Product	210kHz
Neg Supply Voltage-Nom (Vsup)	-5V
Unity Gain BW-Nom	200 kHz
Voltage Gain	124.61dB
Average Bias Current-Max (IIB)	0.001μA
Low-Offset	NO
Frequency Compensation	YES
Supply Voltage Limit-Max	8V
Low-Bias	YES
Micropower	YES
Bias Current-Max (IIB) @25C	0.00006μA
Programmable Power	NO
Nominal Gain Bandwidth Product	200 kHz
Max I/O Voltage	850μV
Power	NO
Input Offset Current-Max (IIO)	0.00006μA
Height	1.75mm
Length	8.65mm
Width	3.91mm
Thickness	1.58mm
Radiation Hardening	No
RoHS Status	ROHS3 Compliant
Lead Free	Lead Free

TLC2254AQD Overview

In order to protect the op amps, a 14-SOIC (0.154, 3.90mm Width) case is used. General Purpose-type instrumentation amplifiers are used in this application. As far as the packaging is concerned, buffer op amp is delivered in a Tube case. It is estimated that there will be 14 terminations in the next few months. Buffer amplifier has a total of 14 pins. Please take in mind that op amp should be run at 5V. A type of Operational Amplifier op amp ic can be identified by the fact that this is a type of Operational Amplifier device. 14 pins are available on the instrumentation amplifier. With regards to the offset voltage of the input, buffer amplifier is rated at 200μV. For this electrical component, the recommended mounting type is Surface Mount, which is the most common. Regarding the operating temperature of this device, instrumentation amplifier performs well at a temperature of -40°C~125°C . As long as the supply current of the chip does not exceed 160μA, this op amp ic can operate. Keeping the voltage gain at 124.61dB is the best course of action. There are 4 circuits on op amps. There are more than a few advantages to using this instrumentation amplifier, one of which is that it outputs Rail-to-Rail signals. The operating supply voltage of the buffer op amp is rated at 8V. The instrumentation amplifier is packed in the form of TR. As the name implies, LinCMOS? refers to the series of the buffer op amp.