Parameters |
Factory Lead Time |
1 Week |
Lifecycle Status |
ACTIVE (Last Updated: 3 days ago) |
Mounting Type |
Surface Mount |
Package / Case |
14-SOIC (0.154, 3.90mm Width) |
Surface Mount |
YES |
Number of Pins |
14 |
Operating Temperature |
0°C~70°C |
Packaging |
Tube |
Series |
LinCMOS™ |
JESD-609 Code |
e4 |
Pbfree Code |
yes |
Part Status |
Active |
Moisture Sensitivity Level (MSL) |
1 (Unlimited) |
Number of Terminations |
14 |
ECCN Code |
EAR99 |
Terminal Finish |
Nickel/Palladium/Gold (Ni/Pd/Au) |
Subcategory |
Operational Amplifier |
Terminal Position |
DUAL |
Terminal Form |
GULL WING |
Peak Reflow Temperature (Cel) |
260 |
Number of Functions |
4 |
Supply Voltage |
5V |
Terminal Pitch |
1.27mm |
Base Part Number |
TLC2254 |
Pin Count |
14 |
Output Type |
Rail-to-Rail |
Operating Supply Voltage |
8V |
Number of Channels |
4 |
Operating Supply Current |
160μA |
Nominal Supply Current |
250μA |
Power Dissipation |
950mW |
Output Current |
50mA |
Slew Rate |
0.12V/μs |
Architecture |
VOLTAGE-FEEDBACK |
Amplifier Type |
General Purpose |
Common Mode Rejection Ratio |
70 dB |
Current - Input Bias |
1pA |
Voltage - Supply, Single/Dual (±) |
4.4V~16V ±2.2V~8V |
Output Current per Channel |
50mA |
Input Offset Voltage (Vos) |
1.5mV |
Bandwidth |
200 kHz |
Gain Bandwidth Product |
210kHz |
Neg Supply Voltage-Nom (Vsup) |
-5V |
Unity Gain BW-Nom |
200 kHz |
Voltage Gain |
124.61dB |
Average Bias Current-Max (IIB) |
0.0001μA |
Low-Offset |
NO |
Frequency Compensation |
YES |
Supply Voltage Limit-Max |
8V |
Voltage - Input Offset |
200μV |
Low-Bias |
YES |
Micropower |
YES |
Bias Current-Max (IIB) @25C |
0.00006μA |
Programmable Power |
NO |
Dual Supply Voltage |
5V |
Nominal Gain Bandwidth Product |
200 kHz |
Max I/O Voltage |
1.5mV |
Input Offset Current-Max (IIO) |
0.00006μA |
Height |
1.75mm |
Length |
8.65mm |
Width |
3.91mm |
Thickness |
1.58mm |
Radiation Hardening |
No |
REACH SVHC |
No SVHC |
RoHS Status |
ROHS3 Compliant |
Lead Free |
Lead Free |
TLC2254CDG4 Overview
In the package, you will find a 14-SOIC (0.154, 3.90mm Width)-case to contain the op amp ic. An op amp ic of the General Purpose type. As far as the packaging is concerned, buffer op amp is delivered in a Tube case. We are approaching the 14h termination of the year. Buffer amplifier has a total of 14 pins. The linear amplifier should be run at 5V at all times, so please keep that in mind when using it. To be specific, this instrumentation amplifier is a type of Operational Amplifier. An 14-pin op amp ic is included in the package. The input offset voltage is 1.5mV. This electronic part is best mounted with type Surface Mount. Regarding the operating temperature of this device, instrumentation amplifier performs well at a temperature of 0°C~70°C . In order for this instrumentation amplifier to operate, the supply current needs to be between 160μA and 10 . It is recommended to keep the voltage gain at 124.61dB at all times. There are 4 channels on the operational amplifiers. A benefit of this op amp ic is that it outputs Rail-to-Rail signals, which is one of the many advantages it has to offer. The operating supply voltage of instrumentation amplifier is rated 8V voltage. This buffer amplifier is assigned within the LinCMOS? series by its manufacturer.
TLC2254CDG4 Features
14 Pins
supply voltage of 5V
124.61dB voltage gain
Output Type: Rail-to-Rail
TLC2254CDG4 Applications
There are a lot of Texas Instruments TLC2254CDG4 Instrumentational OP Amps applications.
- Television
- Thermocouples
- Mobile phone
- High gain DC amplifier
- Video conversion and routing
- Multiplication circuits
- Laptop
- High-frequency data acquisition systems
- Car stereo
- Commercial audio systems