TLC2262QD
| Parameters | |
|---|---|
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Subcategory | Operational Amplifier |
| Packing Method | TR |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 2 |
| Supply Voltage | 5V |
| Base Part Number | TLC2262 |
| Pin Count | 8 |
| Output Type | Rail-to-Rail |
| Operating Supply Voltage | 8V |
| Number of Elements | 2 |
| Operating Supply Current | 425μA |
| Nominal Supply Current | 500μA |
| Power Dissipation | 725mW |
| Output Current | 50mA |
| Slew Rate | 0.55V/μs |
| Architecture | VOLTAGE-FEEDBACK |
| Amplifier Type | General Purpose |
| Common Mode Rejection Ratio | 70 dB |
| Current - Input Bias | 1pA |
| Voltage - Supply, Single/Dual (±) | 4.4V~16V ±2.2V~8V |
| Output Current per Channel | 50mA |
| Input Offset Voltage (Vos) | 2.5mV |
| Bandwidth | 820 kHz |
| Gain Bandwidth Product | 730kHz |
| Neg Supply Voltage-Nom (Vsup) | -5V |
| Unity Gain BW-Nom | 710 kHz |
| Voltage Gain | 114.81dB |
| Low-Offset | NO |
| Frequency Compensation | YES |
| Supply Voltage Limit-Max | 8V |
| Voltage - Input Offset | 300μV |
| Low-Bias | YES |
| Micropower | YES |
| Programmable Power | NO |
| Nominal Gain Bandwidth Product | 820 kHz |
| Max I/O Voltage | 2.5mV |
| Height | 1.75mm |
| Length | 4.9mm |
| Width | 3.91mm |
| Thickness | 1.58mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 3 days ago) |
| Mounting Type | Surface Mount |
| Package / Case | 8-SOIC (0.154, 3.90mm Width) |
| Surface Mount | YES |
| Number of Pins | 8 |
| Operating Temperature | -40°C~125°C |
| Packaging | Tube |
| Series | LinCMOS™ |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
TLC2262QD Overview
In the package, you will find a 8-SOIC (0.154, 3.90mm Width)-case to contain the op amp ic. There are two types of operational amplifiers in this circuit. The op amp is delivered to you in a Tube case. A total of 8 terminations have been reported in the past few weeks. It consists of a total of 8 pins in total. As a reminder, this buffer op amp should be powered by 5V battery and that the battery should be inserted in the amplifier. In more specific terms, this linear amplifier can be categoriOperational Amplifiered as a Operational Amplifier-type device. 8 pins are located on the operational amplifiers. As far as the input offset voltage is concerned, linear amplifier rates at 2.5mV. The mounting type that is recommended for this electrical part is Surface Mount. In terms of operating temperature, this instrumentation amplifier is well suited to a temperature range of -40°C~125°C. This op amp can operate from a supply current at 425μA. Keeping the voltage gain at 114.81dB is the best course of action. There are more than a few advantages to using this instrumentation amplifier, one of which is that it outputs Rail-to-Rail signals. There are 2 elements in this buffer amplifier. The operating supply voltage of instrumentation amplifier is rated 8V voltage. For the packing of the instrumentation amplifier, TR is adopted. LinCMOS? is the number that corresponds to the series of the buffer op amp.
TLC2262QD Features
8 Pins
supply voltage of 5V
114.81dB voltage gain
Output Type: Rail-to-Rail
TLC2262QD Applications
There are a lot of Texas Instruments TLC2262QD Instrumentational OP Amps applications.
- Video amplifiers
- Portable media players
- Commercial audio systems
- Proportional counter tubes
- Addition operation circuits
- Scintillation detectors
- Inverse/same-phase proportional circuit
- Fast A/D and D/A converters
- Ultrasound transducers
- Fission chambers
