TLC2264IDR

50mA per Channel 1pA 70 dB Instrumentational OP Amps 0.0008μA 8V 4.4V~16V ±2.2V~8V TLC2264 14 Pins 14-SOIC (0.154, 3.90mm Width)

Manufacturer: Texas Instruments
Nocochips NO: 815-TLC2264IDR
Package: 14-SOIC (0.154, 3.90mm Width)
Datasheet: -
Stock: 842
Description: 50mA per Channel 1pA 70 dB Instrumentational OP Amps 0.0008μA 8V 4.4V~16V ±2.2V~8V TLC2264 14 Pins 14-SOIC (0.154, 3.90mm Width)(Kg)

Inquiry Now

Details

Tags

Parameters
Factory Lead Time	1 Week
Lifecycle Status	ACTIVE (Last Updated: 3 days ago)
Contact Plating	Gold
Mounting Type	Surface Mount
Package / Case	14-SOIC (0.154, 3.90mm Width)
Surface Mount	YES
Number of Pins	14
Operating Temperature	-40°C~125°C
Packaging	Tape & Reel (TR)
Series	LinCMOS™
JESD-609 Code	e4
Pbfree Code	yes
Part Status	Active
Moisture Sensitivity Level (MSL)	1 (Unlimited)
Number of Terminations	14
ECCN Code	EAR99
Subcategory	Operational Amplifier
Packing Method	TR
Max Power Dissipation	950mW
Terminal Position	DUAL
Terminal Form	GULL WING
Peak Reflow Temperature (Cel)	260
Number of Functions	4
Supply Voltage	5V
Terminal Pitch	1.27mm
Base Part Number	TLC2264
Pin Count	14
Output Type	Rail-to-Rail
Operating Supply Voltage	8V
Number of Elements	4
Operating Supply Current	850μA
Nominal Supply Current	1mA
Power Dissipation	950mW
Output Current	50mA
Slew Rate	0.55V/μs
Architecture	VOLTAGE-FEEDBACK
Amplifier Type	General Purpose
Common Mode Rejection Ratio	70 dB
Current - Input Bias	1pA
Voltage - Supply, Single/Dual (±)	4.4V~16V ±2.2V~8V
Output Current per Channel	50mA
Input Offset Voltage (Vos)	2.5mV
Bandwidth	710 kHz
Gain Bandwidth Product	730kHz
Neg Supply Voltage-Nom (Vsup)	-5V
Unity Gain BW-Nom	710 kHz
Voltage Gain	114.81dB
Average Bias Current-Max (IIB)	0.0008μA
Low-Offset	NO
Frequency Compensation	YES
Supply Voltage Limit-Max	8V
Voltage - Input Offset	300μV
Low-Bias	YES
Micropower	YES
Programmable Power	NO
Dual Supply Voltage	5V
Nominal Gain Bandwidth Product	710 kHz
Max I/O Voltage	2.5mV
Input Offset Current-Max (IIO)	0.0008μA
Height	1.75mm
Length	8.65mm
Width	3.91mm
Thickness	1.58mm
Radiation Hardening	No
RoHS Status	ROHS3 Compliant
Lead Free	Lead Free

TLC2264IDR Overview

Packaged in a 14-SOIC (0.154, 3.90mm Width) case, the buffer op amp is ready to use. The instrumentation amplifier in this picture is of the General Purpose-type. It comes in a Tape & Reel (TR) case, which protects instrumentation amplifier from damage during delivery. The number of terminations approaches 14. In total, there are 14 pins on this op amp ic. I would like you to keep in mind that this buffer amplifier needs to be run at a voltage of 5V. A type of Operational Amplifier op amp ic can be identified by the fact that this is a type of Operational Amplifier device. 14 pins are available on the instrumentation amplifier. As far as the input offset voltage is concerned, linear amplifier rates at 2.5mV. This electronic part is recommended for mounting type Surface Mount. In terms of operating temperatures, this buffer amplifier works very well at a temperature of around -40°C~125°C . An 850μA volt supply current is needed for this linear amplifier to operate. Op amp is a member of the 114.81dB's 114.81dB family. A benefit of this op amp ic is that it outputs Rail-to-Rail signals, which is one of the many advantages it has to offer. It is possible to count 4 elements on this buffer amplifier. The operating supply voltage of instrumentation amplifier is rated 8V voltage. The linear amplifier is packaged by using a TR axis. The LinCMOS? represents the op amp's series number.