TLC2272AIP

2 Channels 50mA per Channel 1pA 70 dB Instrumentational OP Amps 0.00006μA 8V 4.4V~16V ±2.2V~8V TLC2272 8 Pins 8-DIP (0.300, 7.62mm)

Manufacturer: Texas Instruments
Nocochips NO: 815-TLC2272AIP
Package: 8-DIP (0.300, 7.62mm)
Datasheet: -
Stock: 814
Description: 2 Channels 50mA per Channel 1pA 70 dB Instrumentational OP Amps 0.00006μA 8V 4.4V~16V ±2.2V~8V TLC2272 8 Pins 8-DIP (0.300, 7.62mm)(Kg)

Inquiry Now

Details

Tags

Parameters
Bias Current-Max (IIB) @25C	0.00006μA
Programmable Power	NO
Dual Supply Voltage	5V
Nominal Gain Bandwidth Product	2.18MHz
Max I/O Voltage	950μV
Power	NO
Input Offset Current-Max (IIO)	0.00006μA
Height	5.08mm
Length	9.81mm
Width	6.35mm
Thickness	3.9mm
Radiation Hardening	No
REACH SVHC	No SVHC
RoHS Status	ROHS3 Compliant
Lead Free	Lead Free
Factory Lead Time	1 Week
Lifecycle Status	ACTIVE (Last Updated: 3 days ago)
Mounting Type	Through Hole
Package / Case	8-DIP (0.300, 7.62mm)
Surface Mount	NO
Number of Pins	8
Operating Temperature	-40°C~125°C
Packaging	Tube
Series	LinCMOS™
JESD-609 Code	e4
Pbfree Code	yes
Part Status	Active
Moisture Sensitivity Level (MSL)	1 (Unlimited)
Number of Terminations	8
ECCN Code	EAR99
Terminal Finish	Nickel/Palladium/Gold (Ni/Pd/Au)
Subcategory	Operational Amplifier
Terminal Position	DUAL
Peak Reflow Temperature (Cel)	260
Number of Functions	2
Supply Voltage	5V
Base Part Number	TLC2272
Pin Count	8
Output Type	Rail-to-Rail
Operating Supply Voltage	8V
Number of Channels	2
Operating Supply Current	2.4mA
Nominal Supply Current	3mA
Output Current	50mA
Slew Rate	3.6V/μs
Architecture	VOLTAGE-FEEDBACK
Amplifier Type	General Purpose
Common Mode Rejection Ratio	70 dB
Current - Input Bias	1pA
Voltage - Supply, Single/Dual (±)	4.4V~16V ±2.2V~8V
Output Current per Channel	50mA
Input Offset Voltage (Vos)	950μV
Bandwidth	2.18MHz
Gain Bandwidth Product	2.25MHz
Neg Supply Voltage-Nom (Vsup)	-5V
Unity Gain BW-Nom	2180 kHz
Voltage Gain	104.86dB
Average Bias Current-Max (IIB)	0.00006μA
Low-Offset	NO
Frequency Compensation	YES
Supply Voltage Limit-Max	8V
Voltage - Input Offset	300μV
Low-Bias	YES
Micropower	NO

TLC2272AIP Overview

Packaged in a 8-DIP (0.300, 7.62mm) case, the buffer op amp is ready to use. Op amps are General Purpose types of amplifier on the chip. Linear amplifier is delivered in a Tube case. There is a growing number of terminations approaching the number of 8. The pins on this board total to 8 in total. I would like to remind you that this buffer op amp should be powered by an 5V battery. A type of Operational Amplifier op amp ic can be identified by the fact that this is a type of Operational Amplifier device. Linear amplifier includes 8 pins. The input offset voltage is 950μV. For this electrical component, Through Hole is the recommended mounting type. It is recommended that this op amp ic be operated at a temperature no higher than -40°C~125°C for optimal performance. A supply current of 2.4mA can be used to operate this linear amplifier. There should be no change in the voltage gain. There are a total of 2 channels available on the op amps. One of the advantages of this op amp is that it outputs Rail-to-Rail signals, which is one of its many advantages. The operating supply voltage of the buffer op amp is rated at 8V. Buffer op amp series numbers are indicated by the LinCMOS?.