Parameters |
Factory Lead Time |
1 Week |
Lifecycle Status |
ACTIVE (Last Updated: 2 days ago) |
Mounting Type |
Surface Mount |
Package / Case |
8-SOIC (0.154, 3.90mm Width) |
Surface Mount |
YES |
Number of Pins |
8 |
Operating Temperature |
-40°C~125°C |
Packaging |
Tape & Reel (TR) |
Series |
LinCMOS™ |
JESD-609 Code |
e4 |
Pbfree Code |
yes |
Part Status |
Active |
Moisture Sensitivity Level (MSL) |
1 (Unlimited) |
Number of Terminations |
8 |
ECCN Code |
EAR99 |
Terminal Finish |
Nickel/Palladium/Gold (Ni/Pd/Au) |
Subcategory |
Operational Amplifier |
Packing Method |
TR |
Terminal Position |
DUAL |
Terminal Form |
GULL WING |
Peak Reflow Temperature (Cel) |
260 |
Number of Functions |
2 |
Supply Voltage |
5V |
Base Part Number |
TLC2272 |
Pin Count |
8 |
Output Type |
Rail-to-Rail |
Operating Supply Voltage |
8V |
Number of Elements |
2 |
Operating Supply Current |
2.4mA |
Nominal Supply Current |
3mA |
Output Current |
50mA |
Slew Rate |
3.6V/μs |
Architecture |
VOLTAGE-FEEDBACK |
Amplifier Type |
General Purpose |
Common Mode Rejection Ratio |
70 dB |
Current - Input Bias |
1pA |
Voltage - Supply, Single/Dual (±) |
4.4V~16V ±2.2V~8V |
Output Current per Channel |
50mA |
Input Offset Voltage (Vos) |
950μV |
Bandwidth |
2.18MHz |
Gain Bandwidth Product |
2.25MHz |
Neg Supply Voltage-Nom (Vsup) |
-5V |
Unity Gain BW-Nom |
2180 kHz |
Voltage Gain |
104.86dB |
Average Bias Current-Max (IIB) |
0.00006μA |
Low-Offset |
NO |
Frequency Compensation |
YES |
Supply Voltage Limit-Max |
8V |
Voltage - Input Offset |
300μV |
Low-Bias |
YES |
Micropower |
NO |
Bias Current-Max (IIB) @25C |
0.00006μA |
Programmable Power |
NO |
Nominal Gain Bandwidth Product |
2.18MHz |
Max I/O Voltage |
950μV |
Power |
NO |
Input Offset Current-Max (IIO) |
0.00006μA |
Height |
1.75mm |
Length |
4.9mm |
Width |
3.91mm |
Thickness |
1.58mm |
Radiation Hardening |
No |
RoHS Status |
ROHS3 Compliant |
Lead Free |
Lead Free |
TLC2272AQDRG4 Overview
Op amp is packaged in 8-SOIC (0.154, 3.90mm Width) case. An op amp of this type is a General Purpose-type. It comes in a Tape & Reel (TR) case, which protects instrumentation amplifier from damage during delivery. There is a growing number of terminations approaching the number of 8. Buffer amplifier has a total of 8 pins on it. It is important to remember that this op amp should be operated at a voltage of 5V volts. To be specific, this instrumentation amplifier is a type of Operational Amplifier. 8 pins are located on the operational amplifiers. The input offset voltage is 950μV. For this electronic part, it is recommended that you mount it with type Surface Mount. In terms of operating temperature, this instrumentation amplifier is well suited to a temperature range of -40°C~125°C. As long as the supply current of the chip does not exceed 2.4mA, this op amp ic can operate. There should be no change in the voltage gain at 104.86dB. As one of the many benefits of this buffer amplifier, it puts out Rail-to-Rail signals, which is one of the many benefits it offers. It is possible to count 2 elements on this buffer amplifier. The operating supply voltage of the buffer op amp is rated at 8V. TR is adopted to pack the instrumentation amplifier. Buffer op amp series numbers are indicated by the LinCMOS?.
TLC2272AQDRG4 Features
8 Pins
supply voltage of 5V
104.86dB voltage gain
Output Type: Rail-to-Rail
TLC2272AQDRG4 Applications
There are a lot of Texas Instruments TLC2272AQDRG4 Instrumentational OP Amps applications.
- Professional videography
- Navigation
- Gaming industry
- Home audio systems
- Signal filtering
- Weighing systems
- earphone
- Cinema or auditorium audio system
- Measurements of Wheatstone bridge
- Oscilloscopes