Parameters |
Factory Lead Time |
1 Week |
Lifecycle Status |
ACTIVE (Last Updated: 6 days ago) |
Contact Plating |
Gold |
Mounting Type |
Surface Mount |
Package / Case |
8-SOIC (0.154, 3.90mm Width) |
Surface Mount |
YES |
Number of Pins |
8 |
Operating Temperature |
0°C~70°C |
Packaging |
Tube |
Series |
LinCMOS™ |
JESD-609 Code |
e4 |
Pbfree Code |
yes |
Part Status |
Active |
Moisture Sensitivity Level (MSL) |
1 (Unlimited) |
Number of Terminations |
8 |
ECCN Code |
EAR99 |
Subcategory |
Operational Amplifier |
Terminal Position |
DUAL |
Terminal Form |
GULL WING |
Peak Reflow Temperature (Cel) |
260 |
Number of Functions |
2 |
Supply Voltage |
5V |
Base Part Number |
TLC2272 |
Pin Count |
8 |
Output Type |
Rail-to-Rail |
Operating Supply Voltage |
8V |
Number of Channels |
2 |
Operating Supply Current |
2.4mA |
Nominal Supply Current |
3mA |
Output Current |
50mA |
Max Supply Current |
3mA |
Slew Rate |
3.6V/μs |
Architecture |
VOLTAGE-FEEDBACK |
Amplifier Type |
General Purpose |
Common Mode Rejection Ratio |
70 dB |
Current - Input Bias |
1pA |
Voltage - Supply, Single/Dual (±) |
4.4V~16V ±2.2V~8V |
Output Current per Channel |
50mA |
Input Offset Voltage (Vos) |
2.5mV |
Bandwidth |
2.18MHz |
Gain Bandwidth Product |
2.25MHz |
Neg Supply Voltage-Nom (Vsup) |
-5V |
Unity Gain BW-Nom |
2180 kHz |
Voltage Gain |
104.86dB |
Average Bias Current-Max (IIB) |
0.00006μA |
Low-Offset |
NO |
Frequency Compensation |
YES |
Supply Voltage Limit-Max |
8V |
Voltage - Input Offset |
300μV |
Low-Bias |
YES |
Micropower |
NO |
Bias Current-Max (IIB) @25C |
0.00006μA |
Programmable Power |
NO |
Dual Supply Voltage |
5V |
Nominal Gain Bandwidth Product |
2.18MHz |
Max I/O Voltage |
2.5mV |
Power |
NO |
Input Offset Current-Max (IIO) |
0.00006μA |
Height |
1.75mm |
Length |
4.9mm |
Width |
3.91mm |
Thickness |
1.58mm |
Radiation Hardening |
No |
REACH SVHC |
No SVHC |
RoHS Status |
ROHS3 Compliant |
Lead Free |
Lead Free |
TLC2272CD Overview
The linear amplifier is packaged in a 8-SOIC (0.154, 3.90mm Width) case which makes it easy for the consumer to handle. Op amps are General Purpose types of amplifier on the chip. A Tube case is used for delivering the op amp. It is estimated that there will be at least 8 terminations this year. In total, there are 8 pins on this op amp ic. I would like you to keep in mind that this buffer amplifier needs to be run at a voltage of 5V. A type of Operational Amplifier op amp ic can be identified by the fact that this is a type of Operational Amplifier device. 8 pins are located on the operational amplifiers. There is an input offset voltage of 2.5mV for this buffer op amp. For this electrical component, the recommended mounting type is Surface Mount, which is the most common. Regarding the operating temperature of this device, instrumentation amplifier performs well at a temperature of 0°C~70°C . It is possible to operate this buffer amplifier from a supply current of 2.4mA . Voltage gain should remain at 104.86dB. Instrumentation amplifier has 2 channels on it. Buffer amplifier produces Rail-to-Rail signals, which is one of its many benefits. The operating supply voltage of instrumentation amplifier is rated 8V voltage. As the name implies, LinCMOS? refers to the series of the buffer op amp.
TLC2272CD Features
8 Pins
supply voltage of 5V
104.86dB voltage gain
Output Type: Rail-to-Rail
TLC2272CD Applications
There are a lot of Texas Instruments TLC2272CD Instrumentational OP Amps applications.
- Video conversion and routing
- Automotive sensors
- Hand-held batteries
- Ultrasound transducers
- Navigation
- Scintillation detectors
- Portable docking station
- Radiation thermometry transducers
- Switching amplifier
- Exponential operation circuits