Parameters |
Factory Lead Time |
1 Week |
Lifecycle Status |
ACTIVE (Last Updated: 3 days ago) |
Mounting Type |
Surface Mount |
Package / Case |
8-SOIC (0.154, 3.90mm Width) |
Surface Mount |
YES |
Number of Pins |
8 |
Operating Temperature |
-40°C~125°C |
Packaging |
Tube |
Series |
LinCMOS™ |
JESD-609 Code |
e4 |
Pbfree Code |
yes |
Part Status |
Active |
Moisture Sensitivity Level (MSL) |
1 (Unlimited) |
Number of Terminations |
8 |
ECCN Code |
EAR99 |
Terminal Finish |
Nickel/Palladium/Gold (Ni/Pd/Au) |
Subcategory |
Operational Amplifier |
Terminal Position |
DUAL |
Terminal Form |
GULL WING |
Peak Reflow Temperature (Cel) |
260 |
Number of Functions |
2 |
Supply Voltage |
5V |
Base Part Number |
TLC2272 |
Pin Count |
8 |
Output Type |
Rail-to-Rail |
Operating Supply Voltage |
8V |
Number of Channels |
2 |
Operating Supply Current |
2.4mA |
Nominal Supply Current |
3mA |
Output Current |
50mA |
Max Supply Current |
3mA |
Slew Rate |
3.6V/μs |
Architecture |
VOLTAGE-FEEDBACK |
Amplifier Type |
General Purpose |
Common Mode Rejection Ratio |
70 dB |
Current - Input Bias |
1pA |
Voltage - Supply, Single/Dual (±) |
4.4V~16V ±2.2V~8V |
Output Current per Channel |
50mA |
Input Offset Voltage (Vos) |
2.5mV |
Bandwidth |
2.18MHz |
Gain Bandwidth Product |
2.25MHz |
Neg Supply Voltage-Nom (Vsup) |
-5V |
Unity Gain BW-Nom |
2180 kHz |
Voltage Gain |
104.86dB |
Average Bias Current-Max (IIB) |
0.00006μA |
Low-Offset |
NO |
Frequency Compensation |
YES |
Supply Voltage Limit-Max |
8V |
Voltage - Input Offset |
300μV |
Low-Bias |
YES |
Micropower |
NO |
Bias Current-Max (IIB) @25C |
0.00006μA |
Programmable Power |
NO |
Dual Supply Voltage |
5V |
Nominal Gain Bandwidth Product |
2.18MHz |
Max I/O Voltage |
2.5mV |
Power |
NO |
Input Offset Current-Max (IIO) |
0.00006μA |
Height |
1.75mm |
Length |
4.9mm |
Width |
3.91mm |
Thickness |
1.58mm |
Radiation Hardening |
No |
REACH SVHC |
No SVHC |
RoHS Status |
ROHS3 Compliant |
Lead Free |
Lead Free |
TLC2272ID Overview
Op amp is packaged in 8-SOIC (0.154, 3.90mm Width) case. An op amp ic of the General Purpose type. A Tube case is used for delivering the op amp. During the past two weeks, there have been close to 8 terminations. Linear amplifier has a total of 8 pins. As a reminder, this buffer op amp should be powered by 5V battery and that the battery should be inserted in the amplifier. In order to be more specific, this instrumentation amplifier is one of the types of Operational Amplifier devices. An 8-pin op amp ic is included in the package. Regarding input offset voltage, buffer amplifier rates 2.5mV voltage. Surface Mount is the recommended mounting type for this linear amplifier. In terms of operating temperature, this instrumentation amplifier performs well at a temperature of about -40°C~125°C . An 2.4mA volt supply current is needed for this linear amplifier to operate. There should be no change in the voltage gain. The op amp ic has 2 channels on it. One of the many advantages that this linear amplifier has, among many other things, is the fact that it outputs Rail-to-Rail signals. The operating supply voltage of instrumentation amplifier is rated 8V voltage. The LinCMOS? indicates the series number of the op amp.
TLC2272ID Features
8 Pins
supply voltage of 5V
104.86dB voltage gain
Output Type: Rail-to-Rail
TLC2272ID Applications
There are a lot of Texas Instruments TLC2272ID Instrumentational OP Amps applications.
- Oscilloscopes
- Information processing
- Multiplication circuits
- Radiation thermometry transducers
- Ultrasound transducers
- Cinema or auditorium audio system
- Displayers for aircraft and air transportation control systems
- pH (acidity)
- Large motor controllers
- Video conversion and routing