TLC2272IP
| Parameters | |
|---|---|
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 3 days ago) |
| Mounting Type | Through Hole |
| Package / Case | 8-DIP (0.300, 7.62mm) |
| Surface Mount | NO |
| Number of Pins | 8 |
| Operating Temperature | -40°C~125°C |
| Packaging | Tube |
| Series | LinCMOS™ |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Subcategory | Operational Amplifier |
| Terminal Position | DUAL |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 2 |
| Supply Voltage | 5V |
| Base Part Number | TLC2272 |
| Pin Count | 8 |
| Output Type | Rail-to-Rail |
| Operating Supply Voltage | 8V |
| Number of Channels | 2 |
| Operating Supply Current | 2.4mA |
| Nominal Supply Current | 3mA |
| Output Current | 50mA |
| Slew Rate | 3.6V/μs |
| Architecture | VOLTAGE-FEEDBACK |
| Amplifier Type | General Purpose |
| Common Mode Rejection Ratio | 70 dB |
| Current - Input Bias | 1pA |
| Voltage - Supply, Single/Dual (±) | 4.4V~16V ±2.2V~8V |
| Output Current per Channel | 50mA |
| Input Offset Voltage (Vos) | 2.5mV |
| Bandwidth | 2.18MHz |
| Gain Bandwidth Product | 2.25MHz |
| Neg Supply Voltage-Nom (Vsup) | -5V |
| Unity Gain BW-Nom | 2180 kHz |
| Voltage Gain | 104.86dB |
| Average Bias Current-Max (IIB) | 0.00006μA |
| Low-Offset | NO |
| Frequency Compensation | YES |
| Supply Voltage Limit-Max | 8V |
| Voltage - Input Offset | 300μV |
| Low-Bias | YES |
| Micropower | NO |
| Bias Current-Max (IIB) @25C | 0.00006μA |
| Programmable Power | NO |
| Dual Supply Voltage | 5V |
| Nominal Gain Bandwidth Product | 2.18MHz |
| Max I/O Voltage | 2.5mV |
| Power | NO |
| Input Offset Current-Max (IIO) | 0.00006μA |
| Height | 5.08mm |
| Length | 9.81mm |
| Width | 6.35mm |
| Thickness | 3.9mm |
| Radiation Hardening | No |
TLC2272IP Overview
A 8-DIP (0.300, 7.62mm) case is used to package the op amp. An op amp ic of the General Purpose type. A Tube case is used to deliver the buffer op amp. There have been a total of 8 terminations over the past year. In total, there are 8 pins on this op amp ic. Please take in mind that op amp should be run at 5V. In order to be more specific, this instrumentation amplifier is one of the types of Operational Amplifier devices. It has 8 pins that make up the linear amplifier. Op amp rates 2.5mV as input offset voltage. For this electrical component, the recommended mounting type is Through Hole, which is the most common. According to the manufacturer, this buffer op amp works well at -40°C~125°C , which is a good operating temperature. This op amp can operate from a supply current at 2.4mA. You should keep the voltage gain at 104.86dB for the time being. As far as the device is concerned, buffer amplifier has 2 channels. One of the many benefits of this op amp ic is that it emits Rail-to-Rail signals. The operating supply voltage of instrumentation amplifier is rated 8V voltage. LinCMOS? corresponds to the op amp's series.
TLC2272IP Features
8 Pins
supply voltage of 5V
104.86dB voltage gain
Output Type: Rail-to-Rail
TLC2272IP Applications
There are a lot of Texas Instruments TLC2272IP Instrumentational OP Amps applications.
- Large motor controllers
- PDA
- Signal amplification
- Television broadcasting equipment
- Mobile phone
- Car stereo
- Communication device
- Signal filtering
- Power control
- Communication
