banner_page

TLC2272QDG4

50mA per Channel 1pA 70 dB Instrumentational OP Amps 0.00006μA 8V 4.4V~16V ±2.2V~8V TLC2272 8 Pins 8-SOIC (0.154, 3.90mm Width)


  • Manufacturer: Texas Instruments
  • Nocochips NO: 815-TLC2272QDG4
  • Package: 8-SOIC (0.154, 3.90mm Width)
  • Datasheet: -
  • Stock: 657
  • Description: 50mA per Channel 1pA 70 dB Instrumentational OP Amps 0.00006μA 8V 4.4V~16V ±2.2V~8V TLC2272 8 Pins 8-SOIC (0.154, 3.90mm Width)(Kg)

Details

Tags

Parameters
Factory Lead Time 1 Week
Lifecycle Status ACTIVE (Last Updated: 1 week ago)
Mounting Type Surface Mount
Package / Case 8-SOIC (0.154, 3.90mm Width)
Surface Mount YES
Number of Pins 8
Operating Temperature -40°C~125°C
Packaging Tube
Series LinCMOS™
JESD-609 Code e4
Pbfree Code yes
Part Status Active
Moisture Sensitivity Level (MSL) 1 (Unlimited)
Number of Terminations 8
ECCN Code EAR99
Terminal Finish Nickel/Palladium/Gold (Ni/Pd/Au)
Subcategory Operational Amplifier
Packing Method TR
Terminal Position DUAL
Terminal Form GULL WING
Peak Reflow Temperature (Cel) 260
Number of Functions 2
Supply Voltage 5V
Base Part Number TLC2272
Pin Count 8
Output Type Rail-to-Rail
Operating Supply Voltage 8V
Number of Elements 2
Operating Supply Current 2.4mA
Nominal Supply Current 3mA
Output Current 50mA
Slew Rate 3.6V/μs
Architecture VOLTAGE-FEEDBACK
Amplifier Type General Purpose
Common Mode Rejection Ratio 70 dB
Current - Input Bias 1pA
Voltage - Supply, Single/Dual (±) 4.4V~16V ±2.2V~8V
Output Current per Channel 50mA
Input Offset Voltage (Vos) 2.5mV
Bandwidth 2.18MHz
Gain Bandwidth Product 2.25MHz
Neg Supply Voltage-Nom (Vsup) -5V
Unity Gain BW-Nom 2180 kHz
Voltage Gain 104.86dB
Average Bias Current-Max (IIB) 0.00006μA
Low-Offset NO
Frequency Compensation YES
Supply Voltage Limit-Max 8V
Voltage - Input Offset 300μV
Low-Bias YES
Micropower NO
Bias Current-Max (IIB) @25C 0.00006μA
Programmable Power NO
Nominal Gain Bandwidth Product 2.18MHz
Max I/O Voltage 2.5mV
Power NO
Input Offset Current-Max (IIO) 0.00006μA
Height 1.75mm
Length 4.9mm
Width 3.91mm
Thickness 1.58mm
Radiation Hardening No
RoHS Status ROHS3 Compliant
Lead Free Lead Free

TLC2272QDG4 Overview


It is packaged in an 8-SOIC (0.154, 3.90mm Width)-case that protects the operational amplifiers from damage. An op amp ic of the General Purpose type. A Tube case is used for delivering the op amp. The number of terminations approaches 8. It consists of a total of 8 pins in total. It is important to remember that this op amp should be operated at a voltage of 5V volts. To be specific, this instrumentation amplifier is a type of Operational Amplifier. There are 8 pins on this chip. Regarding input offset voltage, op amp rates 2.5mV. This electronic component is recommended to be mounted using the mounting type Surface Mount. With regard to operating temperature, op amp ranges -40°C~125°C. Using an 2.4mA supply current, this operational amplifier ics can be operated. Maintain 104.86dB as the voltage gain. One of the many advantages that this linear amplifier has, among many other things, is the fact that it outputs Rail-to-Rail signals. 2 elements make up the design of this buffer amplifier. The operating supply voltage of the buffer op amp is rated at 8V. TR is adopted to pack the instrumentation amplifier. This buffer amplifier is assigned within the LinCMOS? series by its manufacturer.

TLC2272QDG4 Features


8 Pins
supply voltage of 5V
104.86dB voltage gain
Output Type: Rail-to-Rail

TLC2272QDG4 Applications


There are a lot of Texas Instruments TLC2272QDG4 Instrumentational OP Amps applications.

  • Signal transformation
  • pH (acidity)
  • Proportional operation circuits
  • PDA
  • Tablets
  • Ultrasound transducers
  • Video computer boards
  • Band-stop filter
  • Weighing systems
  • Differentiator circuits

Write a review

Note: HTML is not translated!
    Bad           Good