Parameters |
Factory Lead Time |
1 Week |
Lifecycle Status |
ACTIVE (Last Updated: 1 week ago) |
Contact Plating |
Gold |
Mounting Type |
Surface Mount |
Package / Case |
8-SOIC (0.154, 3.90mm Width) |
Surface Mount |
YES |
Number of Pins |
8 |
Operating Temperature |
-40°C~125°C |
Packaging |
Tape & Reel (TR) |
Series |
LinCMOS™ |
JESD-609 Code |
e4 |
Pbfree Code |
yes |
Part Status |
Active |
Moisture Sensitivity Level (MSL) |
1 (Unlimited) |
Number of Terminations |
8 |
ECCN Code |
EAR99 |
Subcategory |
Operational Amplifier |
Packing Method |
TR |
Terminal Position |
DUAL |
Terminal Form |
GULL WING |
Peak Reflow Temperature (Cel) |
260 |
Number of Functions |
2 |
Supply Voltage |
5V |
Base Part Number |
TLC2272 |
Pin Count |
8 |
Output Type |
Rail-to-Rail |
Operating Supply Voltage |
8V |
Number of Circuits |
2 |
Operating Supply Current |
2.4mA |
Nominal Supply Current |
3mA |
Output Current |
50mA |
Slew Rate |
3.6V/μs |
Architecture |
VOLTAGE-FEEDBACK |
Amplifier Type |
General Purpose |
Common Mode Rejection Ratio |
70 dB |
Current - Input Bias |
1pA |
Voltage - Supply, Single/Dual (±) |
4.4V~16V ±2.2V~8V |
Output Current per Channel |
50mA |
Input Offset Voltage (Vos) |
300μV |
Bandwidth |
2.18MHz |
Gain Bandwidth Product |
2.25MHz |
Neg Supply Voltage-Nom (Vsup) |
-5V |
Unity Gain BW-Nom |
2180 kHz |
Voltage Gain |
104.86dB |
Average Bias Current-Max (IIB) |
0.00006μA |
Low-Offset |
NO |
Frequency Compensation |
YES |
Supply Voltage Limit-Max |
8V |
Low-Bias |
YES |
Micropower |
NO |
Bias Current-Max (IIB) @25C |
0.00006μA |
Programmable Power |
NO |
Nominal Gain Bandwidth Product |
2.18MHz |
Max I/O Voltage |
2.5mV |
Power |
NO |
Input Offset Current-Max (IIO) |
0.00006μA |
Height |
1.75mm |
Length |
4.9mm |
Width |
3.91mm |
Thickness |
1.58mm |
Radiation Hardening |
No |
RoHS Status |
ROHS3 Compliant |
Lead Free |
Lead Free |
TLC2272QDR Overview
There is a 8-SOIC (0.154, 3.90mm Width) case in which the instrumentation amplifier is packaged. General Purpose-type instrumentation amplifiers are used in this application. A Tape & Reel (TR) case is used to deliver the buffer op amp. In recent months, the number of terminations has approached 8. The pins on this board total to 8 in total. I would like you to keep in mind that this buffer amplifier needs to be run at a voltage of 5V. A type of Operational Amplifier op amp ic can be identified by the fact that this is a type of Operational Amplifier device. Linear amplifier includes 8 pins. With regard to input offset voltage, instrumentation amplifier is rated at 300μV. This electronic component is recommended to be mounted using the mounting type Surface Mount. According to the manufacturer, this buffer op amp works well at -40°C~125°C , which is a good operating temperature. It is possible to operate this buffer amplifier from a supply current of 2.4mA . Op amp is a member of the 104.86dB's 104.86dB family. This op amp ic has 2 circuits. One of the many benefits of this op amp ic is that it emits Rail-to-Rail signals. The operating supply voltage of the buffer op amp is rated at 8V. For the packing of the instrumentation amplifier, TR is adopted. LinCMOS? corresponds to linear amplifier's series.
TLC2272QDR Features
8 Pins
supply voltage of 5V
104.86dB voltage gain
Output Type: Rail-to-Rail
TLC2272QDR Applications
There are a lot of Texas Instruments TLC2272QDR Instrumentational OP Amps applications.
- Test and measurement instruments
- Radar
- Instrumentation
- High/low-pass filter circuit
- Fast A/D and D/A converters
- Video amplifiers
- Large motor controllers
- Image computer boards
- Power control
- Switching amplifier