banner_page

TLC2272QPWRG4

50mA per Channel 1pA 70 dB Instrumentational OP Amps 0.00006μA 8V 4.4V~16V ±2.2V~8V TLC2272 8 Pins 8-TSSOP (0.173, 4.40mm Width)


  • Manufacturer: Texas Instruments
  • Nocochips NO: 815-TLC2272QPWRG4
  • Package: 8-TSSOP (0.173, 4.40mm Width)
  • Datasheet: -
  • Stock: 212
  • Description: 50mA per Channel 1pA 70 dB Instrumentational OP Amps 0.00006μA 8V 4.4V~16V ±2.2V~8V TLC2272 8 Pins 8-TSSOP (0.173, 4.40mm Width)(Kg)

Details

Tags

Parameters
Factory Lead Time 1 Week
Lifecycle Status ACTIVE (Last Updated: 3 days ago)
Contact Plating Gold
Mounting Type Surface Mount
Package / Case 8-TSSOP (0.173, 4.40mm Width)
Surface Mount YES
Number of Pins 8
Operating Temperature -40°C~125°C
Packaging Tape & Reel (TR)
Series LinCMOS™
JESD-609 Code e4
Pbfree Code yes
Part Status Active
Moisture Sensitivity Level (MSL) 1 (Unlimited)
Number of Terminations 8
ECCN Code EAR99
Subcategory Operational Amplifier
Packing Method TR
Terminal Position DUAL
Terminal Form GULL WING
Peak Reflow Temperature (Cel) 260
Number of Functions 2
Supply Voltage 5V
Terminal Pitch 0.65mm
Base Part Number TLC2272
Pin Count 8
Output Type Rail-to-Rail
Operating Supply Voltage 8V
Number of Elements 2
Operating Supply Current 2.4mA
Nominal Supply Current 3mA
Output Current 50mA
Slew Rate 3.6V/μs
Architecture VOLTAGE-FEEDBACK
Amplifier Type General Purpose
Common Mode Rejection Ratio 70 dB
Current - Input Bias 1pA
Voltage - Supply, Single/Dual (±) 4.4V~16V ±2.2V~8V
Output Current per Channel 50mA
Input Offset Voltage (Vos) 2.5mV
Bandwidth 2.18MHz
Gain Bandwidth Product 2.25MHz
Neg Supply Voltage-Nom (Vsup) -5V
Unity Gain BW-Nom 2180 kHz
Voltage Gain 104.86dB
Average Bias Current-Max (IIB) 0.00006μA
Low-Offset NO
Frequency Compensation YES
Supply Voltage Limit-Max 8V
Voltage - Input Offset 300μV
Low-Bias YES
Micropower NO
Bias Current-Max (IIB) @25C 0.00006μA
Programmable Power NO
Nominal Gain Bandwidth Product 2.18MHz
Max I/O Voltage 2.5mV
Power NO
Input Offset Current-Max (IIO) 0.00006μA
Height 1.2mm
Length 3mm
Width 4.4mm
Thickness 1mm
Radiation Hardening No
RoHS Status ROHS3 Compliant
Lead Free Lead Free

TLC2272QPWRG4 Overview


It is packaged in an 8-TSSOP (0.173, 4.40mm Width)-case that protects the operational amplifiers from damage. A General Purpose-type buffer amplifier is shown here. As far as the packaging is concerned, buffer op amp is delivered in a Tape & Reel (TR) case. It is estimated that there will be at least 8 terminations this year. In this case, there are 8 pins on the board. Please take in mind that op amp should be run at 5V. There are two types of Operational Amplifier op amps in this case, and this device falls into one of them. 8 pins are included on the operational amplifiers. With regard to input offset voltage, instrumentation amplifier is rated at 2.5mV. For this electrical component, the recommended mounting type is Surface Mount, which is the most common. According to the manufacturer, this buffer op amp works well at -40°C~125°C , which is a good operating temperature. Using a supply current of 2.4mA , this buffer op amp will be able to operate. Voltage gain should remain at 104.86dB. One of the many benefits of this op amp ic is that it emits Rail-to-Rail signals. There are 2 elements in this buffer amplifier. The operating supply voltage of the buffer op amp is rated at 8V. It is used TR to pack the op amps. The LinCMOS? indicates the series number of the op amp.

TLC2272QPWRG4 Features


8 Pins
supply voltage of 5V
104.86dB voltage gain
Output Type: Rail-to-Rail

TLC2272QPWRG4 Applications


There are a lot of Texas Instruments TLC2272QPWRG4 Instrumentational OP Amps applications.

  • Weighing systems
  • Oscilloscopes
  • Logarithmic operation circuits
  • Proportional counter tubes
  • Instrumentation
  • Navigation
  • Non-polarized electrodes
  • Car stereo
  • Subtraction operation circuits
  • Vehicle electronics

Write a review

Note: HTML is not translated!
    Bad           Good