TLC2272QPWRQ1

50mA per Channel 1pA 70 dB Instrumentational OP Amps 0.00006μA 8V 4.4V~16V ±2.2V~8V TLC2272 8 Pins 8-TSSOP (0.173, 4.40mm Width)

Manufacturer: Texas Instruments
Nocochips NO: 815-TLC2272QPWRQ1
Package: 8-TSSOP (0.173, 4.40mm Width)
Datasheet: -
Stock: 203
Description: 50mA per Channel 1pA 70 dB Instrumentational OP Amps 0.00006μA 8V 4.4V~16V ±2.2V~8V TLC2272 8 Pins 8-TSSOP (0.173, 4.40mm Width)(Kg)

Inquiry Now

Details

Tags

Parameters
Gain Bandwidth Product	2.25MHz
Neg Supply Voltage-Nom (Vsup)	-5V
Unity Gain BW-Nom	2180 kHz
Voltage Gain	104.86dB
Average Bias Current-Max (IIB)	0.00006μA
Low-Offset	NO
Frequency Compensation	YES
Supply Voltage Limit-Max	8V
Voltage - Input Offset	300μV
Low-Bias	YES
Micropower	NO
Bias Current-Max (IIB) @25C	0.00006μA
Programmable Power	NO
Nominal Gain Bandwidth Product	2.18MHz
Max I/O Voltage	2.5mV
Wideband	NO
Input Offset Current-Max (IIO)	0.00006μA
Height	1.2mm
Length	3mm
Width	4.4mm
Thickness	1mm
Radiation Hardening	No
RoHS Status	ROHS3 Compliant
Lead Free	Lead Free
Factory Lead Time	1 Week
Lifecycle Status	ACTIVE (Last Updated: 3 days ago)
Mounting Type	Surface Mount
Package / Case	8-TSSOP (0.173, 4.40mm Width)
Surface Mount	YES
Number of Pins	8
Operating Temperature	-40°C~125°C
Packaging	Cut Tape (CT)
Series	Automotive, AEC-Q100, LinCMOS™
JESD-609 Code	e4
Pbfree Code	yes
Part Status	Active
Moisture Sensitivity Level (MSL)	1 (Unlimited)
Number of Terminations	8
ECCN Code	EAR99
Terminal Finish	Nickel/Palladium/Gold (Ni/Pd/Au)
Subcategory	Operational Amplifier
Packing Method	TR
Terminal Position	DUAL
Terminal Form	GULL WING
Peak Reflow Temperature (Cel)	260
Number of Functions	2
Supply Voltage	5V
Terminal Pitch	0.65mm
Base Part Number	TLC2272
Pin Count	8
Output Type	Rail-to-Rail
Operating Supply Voltage	8V
Number of Elements	2
Operating Supply Current	2.4mA
Nominal Supply Current	3mA
Power Dissipation	525mW
Output Current	50mA
Slew Rate	3.6V/μs
Architecture	VOLTAGE-FEEDBACK
Amplifier Type	General Purpose
Common Mode Rejection Ratio	70 dB
Current - Input Bias	1pA
Voltage - Supply, Single/Dual (±)	4.4V~16V ±2.2V~8V
Output Current per Channel	50mA
Input Offset Voltage (Vos)	2.5mV

TLC2272QPWRQ1 Overview

Packaged in a 8-TSSOP (0.173, 4.40mm Width) case, the buffer op amp is ready to use. An op amp of this type is a General Purpose-type. In the case of Cut Tape (CT) cases, linear amplifier will be delivered. The number of terminations is approaching the 8 mark. Buffer amplifier has a total of 8 pins. Please take in mind that op amp should be run at 5V. It should be noted that this op amp is a type of Operational Amplifier device. There are 8 pins on this chip. There is an input offset voltage of 2.5mV for this buffer op amp. For this electrical component, Surface Mount is the recommended mounting type. The buffer amplifier functions well at -40°C~125°C as far as operating temperature is concerned. As long as the supply current of the chip does not exceed 2.4mA, this op amp ic can operate. 104.86dB should remain the voltage gain. In addition to outputting Rail-to-Rail signals, this op amp ic offers a number of other advantages. There are 2 elements in total in this linear amplifier. The operating supply voltage of the buffer op amp is rated at 8V. The instrumentation amplifier is packed in the form of TR. Instrumentation amplifiers are numbered by their Automotive, AEC-Q100, LinCMOS? series.