TLC2274AQPWRQ1
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 3 days ago) |
| Mounting Type | Surface Mount |
| Package / Case | 14-TSSOP (0.173, 4.40mm Width) |
| Surface Mount | YES |
| Number of Pins | 14 |
| Operating Temperature | -40°C~125°C |
| Packaging | Cut Tape (CT) |
| Series | Automotive, AEC-Q100, LinCMOS™ |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 14 |
| ECCN Code | EAR99 |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Subcategory | Operational Amplifier |
| Packing Method | TR |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 4 |
| Supply Voltage | 5V |
| Base Part Number | TLC2274 |
| Pin Count | 14 |
| Output Type | Rail-to-Rail |
| Operating Supply Voltage | 8V |
| Number of Elements | 4 |
| Operating Supply Current | 4.8mA |
| Nominal Supply Current | 6mA |
| Power Dissipation | 700mW |
| Output Current | 50mA |
| Slew Rate | 3.6V/μs |
| Architecture | VOLTAGE-FEEDBACK |
| Amplifier Type | General Purpose |
| Common Mode Rejection Ratio | 70 dB |
| Current - Input Bias | 1pA |
| Voltage - Supply, Single/Dual (±) | 4.4V~16V ±2.2V~8V |
| Output Current per Channel | 50mA |
| Input Offset Voltage (Vos) | 950μV |
| Gain Bandwidth Product | 2.25MHz |
| Neg Supply Voltage-Nom (Vsup) | -5V |
| Unity Gain BW-Nom | 2180 kHz |
| Voltage Gain | 104.86dB |
| Average Bias Current-Max (IIB) | 0.00006μA |
| Low-Offset | NO |
| Frequency Compensation | YES |
| Supply Voltage Limit-Max | 8V |
| Voltage - Input Offset | 300μV |
| Low-Bias | YES |
| Micropower | NO |
| Bias Current-Max (IIB) @25C | 0.00006μA |
| Programmable Power | NO |
| Nominal Gain Bandwidth Product | 2.18MHz |
| Max I/O Voltage | 950μV |
| Wideband | NO |
| Input Offset Current-Max (IIO) | 0.00006μA |
| Height | 1.2mm |
| Length | 5mm |
| Width | 4.4mm |
| Thickness | 1mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
TLC2274AQPWRQ1 Overview
In order to protect the op amps, a 14-TSSOP (0.173, 4.40mm Width) case is used. This is a General Purpose type op amp. A Cut Tape (CT) case is used for delivering the op amp. It is estimated that there will be 14 terminations in the next few months. The pins on this board total to 14 in total. It would be helpful if you could remember that this op amp ic should be powered by an 5V battery. There are two types of Operational Amplifier op amps in this case, and this device falls into one of them. 14 pins are included on the operational amplifiers. Regarding input offset voltage, op amp rates 950μV. This electronic part is best mounted with type Surface Mount. In terms of operating temperatures, this buffer amplifier works very well at a temperature of around -40°C~125°C . It is possible to operate this buffer amplifier from a supply current of 4.8mA . Voltage gain should remain at 104.86dB. On the output type, there are Rail-to-Rail different types of op amps. 4 elements make up the design of this buffer amplifier. The operating supply voltage of instrumentation amplifier is rated 8V voltage. For the packing of the instrumentation amplifier, TR is adopted. In this case, Automotive, AEC-Q100, LinCMOS? represents the instrumentation amplifiers' series number.
TLC2274AQPWRQ1 Features
14 Pins
supply voltage of 5V
104.86dB voltage gain
Output Type: Rail-to-Rail
TLC2274AQPWRQ1 Applications
There are a lot of Texas Instruments TLC2274AQPWRQ1 Instrumentational OP Amps applications.
- Biopotential
- Displayers for aircraft and air transportation control systems
- Proportional operation circuits
- Portable electronic products powered by batteries
- Portable docking station
- Strain gauges
- Power control
- Hand-held batteries
- PDA
- High speed sample
