TLC2274CPW
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 3 days ago) |
| Mounting Type | Surface Mount |
| Package / Case | 14-TSSOP (0.173, 4.40mm Width) |
| Surface Mount | YES |
| Number of Pins | 14 |
| Operating Temperature | 0°C~70°C |
| Packaging | Tube |
| Series | LinCMOS™ |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 14 |
| ECCN Code | EAR99 |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Subcategory | Operational Amplifier |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 4 |
| Supply Voltage | 5V |
| Base Part Number | TLC2274 |
| Pin Count | 14 |
| Output Type | Rail-to-Rail |
| Operating Supply Voltage | 8V |
| Number of Elements | 4 |
| Operating Supply Current | 4.8mA |
| Nominal Supply Current | 6mA |
| Output Current | 50mA |
| Slew Rate | 3.6V/μs |
| Architecture | VOLTAGE-FEEDBACK |
| Amplifier Type | General Purpose |
| Common Mode Rejection Ratio | 70 dB |
| Current - Input Bias | 1pA |
| Voltage - Supply, Single/Dual (±) | 4.4V~16V ±2.2V~8V |
| Output Current per Channel | 50mA |
| Input Offset Voltage (Vos) | 2.5mV |
| Bandwidth | 2.18MHz |
| Gain Bandwidth Product | 2.25MHz |
| Neg Supply Voltage-Nom (Vsup) | -5V |
| Unity Gain BW-Nom | 2180 kHz |
| Voltage Gain | 104.86dB |
| Average Bias Current-Max (IIB) | 0.00006μA |
| Low-Offset | NO |
| Frequency Compensation | YES |
| Supply Voltage Limit-Max | 8V |
| Voltage - Input Offset | 300μV |
| Low-Bias | YES |
| Micropower | NO |
| Bias Current-Max (IIB) @25C | 0.00006μA |
| Programmable Power | NO |
| Dual Supply Voltage | 5V |
| Nominal Gain Bandwidth Product | 2.18MHz |
| Max I/O Voltage | 2.5mV |
| Power | NO |
| Input Offset Current-Max (IIO) | 0.00006μA |
| Height | 1.2mm |
| Length | 5mm |
| Width | 4.4mm |
| Thickness | 1mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
TLC2274CPW Overview
It is packaged in an 14-TSSOP (0.173, 4.40mm Width)-case that protects the operational amplifiers from damage. Op amps are General Purpose types of amplifier on the chip. Linear amplifier is delivered in a Tube case. During the past two weeks, there have been close to 14 terminations. The pins on this board total to 14 in total. It is important to remember that this op amp should be operated at a voltage of 5V volts. It should be noted that this type of buffer amplifier is exactly what is known as a Operational Amplifier device. The buffer op amp includes 14 pins. With regards to the offset voltage of the input, buffer amplifier is rated at 2.5mV. It is recommended that this electronic component be mounted using the Surface Mount mounting type. The buffer amplifier functions well at 0°C~70°C as far as operating temperature is concerned. This op amp can operate from a supply current at 4.8mA. 104.86dB should remain the voltage gain. This op amp ic outputs Rail-to-Rail signals, which is one of the many benefits it has. For the operating supply voltage of the op amp ic, there is a rating of 4. The operating supply voltage of instrumentation amplifier is rated 8V voltage. The LinCMOS? indicates the series number of the op amp.
TLC2274CPW Features
14 Pins
supply voltage of 5V
104.86dB voltage gain
Output Type: Rail-to-Rail
TLC2274CPW Applications
There are a lot of Texas Instruments TLC2274CPW Instrumentational OP Amps applications.
- Home audio systems
- Voltage regulation circuit
- Video computer boards
- Navigation
- Displayers for aircraft and air transportation control systems
- Fast A/D and D/A converters
- Car stereo
- Automatic control
- Switching amplifier
- Exponential operation circuits
