Parameters |
Factory Lead Time |
1 Week |
Lifecycle Status |
ACTIVE (Last Updated: 4 days ago) |
Mounting Type |
Surface Mount |
Package / Case |
14-SOIC (0.154, 3.90mm Width) |
Surface Mount |
YES |
Number of Pins |
14 |
Operating Temperature |
-40°C~125°C |
Packaging |
Tube |
Series |
LinCMOS™ |
JESD-609 Code |
e4 |
Pbfree Code |
yes |
Part Status |
Active |
Moisture Sensitivity Level (MSL) |
1 (Unlimited) |
Number of Terminations |
14 |
ECCN Code |
EAR99 |
Terminal Finish |
Nickel/Palladium/Gold (Ni/Pd/Au) |
Subcategory |
Operational Amplifier |
Packing Method |
TR |
Terminal Position |
DUAL |
Terminal Form |
GULL WING |
Peak Reflow Temperature (Cel) |
260 |
Number of Functions |
4 |
Supply Voltage |
5V |
Terminal Pitch |
1.27mm |
Base Part Number |
TLC2274 |
Pin Count |
14 |
Output Type |
Rail-to-Rail |
Operating Supply Voltage |
8V |
Number of Channels |
4 |
Operating Supply Current |
4.8mA |
Nominal Supply Current |
6mA |
Output Current |
50mA |
Slew Rate |
3.6V/μs |
Architecture |
VOLTAGE-FEEDBACK |
Amplifier Type |
General Purpose |
Common Mode Rejection Ratio |
70 dB |
Current - Input Bias |
1pA |
Voltage - Supply, Single/Dual (±) |
4.4V~16V ±2.2V~8V |
Output Current per Channel |
50mA |
Input Offset Voltage (Vos) |
300μV |
Bandwidth |
1MHz |
Gain Bandwidth Product |
2.25MHz |
Neg Supply Voltage-Nom (Vsup) |
-5V |
Unity Gain BW-Nom |
2180 kHz |
Voltage Gain |
104.86dB |
Average Bias Current-Max (IIB) |
0.00006μA |
Low-Offset |
NO |
Frequency Compensation |
YES |
Supply Voltage Limit-Max |
8V |
Low-Bias |
YES |
Micropower |
NO |
Bias Current-Max (IIB) @25C |
0.00006μA |
Programmable Power |
NO |
Nominal Gain Bandwidth Product |
2.18MHz |
Max I/O Voltage |
2.5mV |
Power |
NO |
Input Offset Current-Max (IIO) |
0.00006μA |
Height |
1.75mm |
Length |
8.65mm |
Width |
3.91mm |
Thickness |
1.58mm |
Radiation Hardening |
No |
REACH SVHC |
No SVHC |
RoHS Status |
ROHS3 Compliant |
Lead Free |
Lead Free |
TLC2274QD Overview
The linear amplifier is packaged in a 14-SOIC (0.154, 3.90mm Width) case which makes it easy for the consumer to handle. Op amps are General Purpose types of amplifier on the chip. The case in which buffer amplifier is delivered is called a Tube case. The number of terminations approaches 14. Buffer amplifier has a total of 14 pins on it. Please take in mind that op amp should be run at 5V. It should be noted that this type of buffer amplifier is exactly what is known as a Operational Amplifier device. The op amp ic has an array of 14 pins on it. Regarding input offset voltage, op amp rates 300μV. It is recommended that this electronic component be mounted using the Surface Mount mounting type. The buffer amplifier functions well at -40°C~125°C as far as operating temperature is concerned. This op amp can operate from a supply current at 4.8mA. The voltage gain should stay at 104.86dB. On the buffer amps, there are 4 channels that can be used. One of its many advantages is that buffer op amp outputs Rail-to-Rail signals. The operating supply voltage of instrumentation amplifier is rated 8V voltage. An buffer amplifier is packed in a TR-shape according to the design. Buffer op amp series numbers are indicated by the LinCMOS?.
TLC2274QD Features
14 Pins
supply voltage of 5V
104.86dB voltage gain
Output Type: Rail-to-Rail
TLC2274QD Applications
There are a lot of Texas Instruments TLC2274QD Instrumentational OP Amps applications.
- Video data acquisition
- Band-pass filter
- Inverse/same-phase proportional circuit
- High speed sample
- Video amplifiers
- pH (acidity)
- Power control
- Video computer boards
- Proportional operation circuits
- Ultrasound transducers