TLC251ACD
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 6 days ago) |
| Mounting Type | Surface Mount |
| Package / Case | 8-SOIC (0.154, 3.90mm Width) |
| Surface Mount | YES |
| Number of Pins | 8 |
| Operating Temperature | 0°C~70°C |
| Packaging | Tube |
| Series | LinCMOS™ |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Subcategory | Operational Amplifier |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Base Part Number | TLC251 |
| Pin Count | 8 |
| Number of Elements | 1 |
| Operating Supply Current | 950μA |
| Nominal Supply Current | 2mA |
| Power Dissipation | 725mW |
| Slew Rate | 5.3V/μs |
| Architecture | VOLTAGE-FEEDBACK |
| Amplifier Type | General Purpose |
| Common Mode Rejection Ratio | 65 dB |
| Current - Input Bias | 0.7pA |
| Voltage - Supply, Single/Dual (±) | 1.4V~16V ±0.7V~8V |
| Input Offset Voltage (Vos) | 5mV |
| Bandwidth | 1.7MHz |
| Gain Bandwidth Product | 2.2MHz |
| Unity Gain BW-Nom | 1700 kHz |
| Voltage Gain | 87.23dB |
| Average Bias Current-Max (IIB) | 0.00006μA |
| Low-Offset | NO |
| Frequency Compensation | YES |
| Voltage - Input Offset | 900μV |
| Low-Bias | YES |
| Micropower | NO |
| Bias Current-Max (IIB) @25C | 0.00006μA |
| Programmable Power | YES |
| Nominal Gain Bandwidth Product | 1.7MHz |
| Max I/O Voltage | 5mV |
| Input Offset Current-Max (IIO) | 0.00006μA |
| Height | 1.75mm |
| Length | 4.9mm |
| Width | 3.91mm |
| Thickness | 1.58mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
TLC251ACD Overview
In order to protect the op amps, a 8-SOIC (0.154, 3.90mm Width) case is used. This is a General Purpose type op amp. Linear amplifier is delivered in a Tube case. During the past two weeks, there have been close to 8 terminations. It consists of a total of 8 pins in total. Please take in mind that this instrumentation amplifier should be run at 5V. It should be noted that this type of buffer amplifier is exactly what is known as a Operational Amplifier device. There are 8 pins on this chip. Regarding input offset voltage, buffer amplifier rates 5mV voltage. For this electronic part, it is recommended that you mount it with type Surface Mount. It is important to note that this linear amplifier works well at a temperature of 0°C~70°C when it comes to operating temperatureYou can run this op amp ic on 950μA . Maintain 87.23dB as the voltage gain. The op amp is rated for an operating supply voltage of 1. LinCMOS? corresponds to the op amp's series.
TLC251ACD Features
8 Pins
supply voltage of 5V
87.23dB voltage gain
TLC251ACD Applications
There are a lot of Texas Instruments TLC251ACD Instrumentational OP Amps applications.
- Blood pressure sensors
- Laptop
- Video data acquisition
- Television
- Signal amplification
- Medical instruments
- Tablets
- High input resistance broadband
- Medical imaging
- Weak signal detection
