TLC251BCP
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 6 days ago) |
| Mounting Type | Through Hole |
| Package / Case | 8-DIP (0.300, 7.62mm) |
| Surface Mount | NO |
| Number of Pins | 8 |
| Operating Temperature | 0°C~70°C |
| Packaging | Tube |
| Series | LinCMOS™ |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Subcategory | Operational Amplifier |
| Terminal Position | DUAL |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Terminal Pitch | 2.54mm |
| Base Part Number | TLC251 |
| Pin Count | 8 |
| Number of Circuits | 1 |
| Operating Supply Current | 950μA |
| Nominal Supply Current | 2mA |
| Slew Rate | 5.3V/μs |
| Architecture | VOLTAGE-FEEDBACK |
| Amplifier Type | General Purpose |
| Common Mode Rejection Ratio | 65 dB |
| Current - Input Bias | 0.7pA |
| Voltage - Supply, Single/Dual (±) | 1.4V~16V ±0.7V~8V |
| Input Offset Voltage (Vos) | 390μV |
| Bandwidth | 1.7MHz |
| Gain Bandwidth Product | 2.2MHz |
| Unity Gain BW-Nom | 1700 kHz |
| Voltage Gain | 87.23dB |
| Average Bias Current-Max (IIB) | 0.00006μA |
| Low-Offset | NO |
| Frequency Compensation | YES |
| Low-Bias | YES |
| Micropower | NO |
| Bias Current-Max (IIB) @25C | 0.00006μA |
| Programmable Power | YES |
| Nominal Gain Bandwidth Product | 1.7MHz |
| Max I/O Voltage | 2mV |
| Power | NO |
| Input Offset Current-Max (IIO) | 0.00006μA |
| Height | 5.08mm |
| Length | 9.81mm |
| Width | 6.35mm |
| Thickness | 3.9mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
TLC251BCP Overview
In the package, you will find a 8-DIP (0.300, 7.62mm)-case to contain the op amp ic. General Purpose-type instrumentation amplifiers are used in this application. Instrumentation amplifier is delivered in a Tube case. There is a growing number of terminations approaching the number of 8. In total, there are 8 pins on this op amp ic. This linear amplifier should be powered by an 5V battery. In order to be more specific, this instrumentation amplifier is one of the types of Operational Amplifier devices. 8 pins are located on the operational amplifiers. Op amp ic rates 390μV for input offset voltage. This electronic component is recommended to be mounted using the mounting type Through Hole. In terms of operating temperature, this instrumentation amplifier is well suited to a temperature range of 0°C~70°C. You can run this op amp ic on 950μA . Voltage gain should remain at 87.23dB. On this buffer amplifier, there are 1 circuits. This buffer amplifier is assigned within the LinCMOS? series by its manufacturer.
TLC251BCP Features
8 Pins
supply voltage of 5V
87.23dB voltage gain
TLC251BCP Applications
There are a lot of Texas Instruments TLC251BCP Instrumentational OP Amps applications.
- Multimedia playback equipment
- Precision measurement
- Inverse/same-phase proportional circuit
- earphone
- Video data acquisition
- Signal amplification
- Instrumentation
- Biopotential
- Communication
- Voltage regulation circuit
