TLC252BCP
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 6 days ago) |
| Mounting Type | Through Hole |
| Package / Case | 8-DIP (0.300, 7.62mm) |
| Surface Mount | NO |
| Number of Pins | 8 |
| Operating Temperature | 0°C~70°C |
| Packaging | Tube |
| Series | LinCMOS™ |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Subcategory | Operational Amplifier |
| Max Power Dissipation | 1W |
| Terminal Position | DUAL |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 2 |
| Supply Voltage | 5V |
| Base Part Number | TLC252 |
| Pin Count | 8 |
| Power Supplies | 1.4/16V |
| Number of Circuits | 2 |
| Operating Supply Current | 1.9mA |
| Nominal Supply Current | 4mA |
| Max Supply Current | 3.2mA |
| Slew Rate | 5.3V/μs |
| Architecture | VOLTAGE-FEEDBACK |
| Amplifier Type | General Purpose |
| Common Mode Rejection Ratio | 65 dB |
| Current - Input Bias | 0.6pA |
| Voltage - Supply, Single/Dual (±) | 1.4V~16V ±0.7V~8V |
| Input Offset Voltage (Vos) | 2mV |
| Bandwidth | 1.7MHz |
| Gain Bandwidth Product | 2.2MHz |
| Unity Gain BW-Nom | 1700 kHz |
| Voltage Gain | 87.23dB |
| Average Bias Current-Max (IIB) | 0.00006μA |
| Low-Offset | NO |
| Frequency Compensation | YES |
| Voltage - Input Offset | 290μV |
| Low-Bias | YES |
| Micropower | NO |
| Bias Current-Max (IIB) @25C | 0.00006μA |
| Programmable Power | NO |
| Nominal Gain Bandwidth Product | 1.7MHz |
| Max I/O Voltage | 2mV |
| Input Offset Current-Max (IIO) | 0.00006μA |
| Height | 5.08mm |
| Length | 9.81mm |
| Width | 6.35mm |
| Thickness | 3.9mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
TLC252BCP Overview
The linear amplifier is packaged in a 8-DIP (0.300, 7.62mm) case which makes it easy for the consumer to handle. General Purpose-type instrumentation amplifiers are used in this application. Upon delivery, op amp ic is packaged in a Tube case. There is a growing number of terminations approaching the number of 8. The pins on this board total to 8 in total. The linear amplifier should be run at 5V at all times, so please keep that in mind when using it. Instrumentation amplifier is a part of Operational Amplifier. Linear amplifier includes 8 pins. With regards to the offset voltage of the input, buffer amplifier is rated at 2mV. For this electronic part, it is recommended that you mount it with type Through Hole. In terms of operating temperature, this instrumentation amplifier is well suited to a temperature range of 0°C~70°C. It is possible to operate this buffer amplifier from a supply current of 1.9mA . Voltage gain should remain at 87.23dB. The buffer amp consists of 2 circuits in total. The LinCMOS? represents the op amp's series number.
TLC252BCP Features
8 Pins
supply voltage of 5V
87.23dB voltage gain
TLC252BCP Applications
There are a lot of Texas Instruments TLC252BCP Instrumentational OP Amps applications.
- Industrial control system
- Logarithmic operation circuits
- Signal transformation
- Video amplifiers
- Communication device
- Addition operation circuits
- Polarized electrodes
- High speed sample
- Hand-held batteries
- Medical instruments
