TLC252CPWR

0.6pA 65 dB Instrumentational OP Amps 0.00006μA 1.4V~16V ±0.7V~8V TLC252 8 Pins 8-TSSOP (0.173, 4.40mm Width)

Manufacturer: Texas Instruments
Nocochips NO: 815-TLC252CPWR
Package: 8-TSSOP (0.173, 4.40mm Width)
Datasheet: PDF
Stock: 931
Description: 0.6pA 65 dB Instrumentational OP Amps 0.00006μA 1.4V~16V ±0.7V~8V TLC252 8 Pins 8-TSSOP (0.173, 4.40mm Width)(Kg)

Details

Tags

Parameters
Factory Lead Time	1 Week
Lifecycle Status	ACTIVE (Last Updated: 1 week ago)
Mounting Type	Surface Mount
Package / Case	8-TSSOP (0.173, 4.40mm Width)
Surface Mount	YES
Number of Pins	8
Operating Temperature	0°C~70°C
Packaging	Cut Tape (CT)
Series	LinCMOS™
JESD-609 Code	e4
Pbfree Code	yes
Part Status	Active
Moisture Sensitivity Level (MSL)	1 (Unlimited)
Number of Terminations	8
ECCN Code	EAR99
Terminal Finish	Nickel/Palladium/Gold (Ni/Pd/Au)
Subcategory	Operational Amplifier
Packing Method	TR
Terminal Position	DUAL
Terminal Form	GULL WING
Peak Reflow Temperature (Cel)	260
Number of Functions	2
Supply Voltage	5V
Terminal Pitch	0.65mm
Base Part Number	TLC252
Pin Count	8
Number of Elements	2
Power Supplies	1.4/16V
Operating Supply Current	1.9mA
Nominal Supply Current	4mA
Power Dissipation	525mW
Slew Rate	5.3V/μs
Architecture	VOLTAGE-FEEDBACK
Amplifier Type	General Purpose
Common Mode Rejection Ratio	65 dB
Current - Input Bias	0.6pA
Voltage - Supply, Single/Dual (±)	1.4V~16V ±0.7V~8V
Input Offset Voltage (Vos)	10mV
Bandwidth	1.7MHz
Gain Bandwidth Product	2.2MHz
Unity Gain BW-Nom	1700 kHz
Voltage Gain	87.23dB
Average Bias Current-Max (IIB)	0.00006μA
Low-Offset	NO
Frequency Compensation	YES
Voltage - Input Offset	1.1mV
Low-Bias	YES
Micropower	NO
Bias Current-Max (IIB) @25C	0.00006μA
Programmable Power	NO
Nominal Gain Bandwidth Product	1.7MHz
Max I/O Voltage	10mV
Input Offset Current-Max (IIO)	0.00006μA
Height	1.2mm
Length	3mm
Width	4.4mm
Thickness	1mm
Radiation Hardening	No
RoHS Status	ROHS3 Compliant
Lead Free	Lead Free

TLC252CPWR Overview

Packaging for the buffer amplifier is in the form of a 8-TSSOP (0.173, 4.40mm Width) case. Op amps are General Purpose types of amplifier on the chip. Linear amplifier is delivered in a Cut Tape (CT) case. There is a growing number of terminations approaching the number of 8. In total, there are 8 pins on this op amp ic. The linear amplifier should be run at 5V at all times, so please keep that in mind when using it. In more specific terms, this linear amplifier can be categoriOperational Amplifiered as a Operational Amplifier-type device. A total of 8 pins are present on the instrumentation amplifier. In terms of the input offset voltage, instrumentation amplifier rates at 10mV. This electronic component is recommended to be mounted using the mounting type Surface Mount. With regard to operating temperature, op amp ranges 0°C~70°C. This op amp can operate from a supply current at 1.9mA. There should be no change in the voltage gain. The total number of elements in this buffer amplifier is 2. It is used TR to pack the op amps. In this case, LinCMOS? represents the instrumentation amplifiers' series number.