TLC254BCN
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 2 days ago) |
| Mounting Type | Through Hole |
| Package / Case | 14-DIP (0.300, 7.62mm) |
| Surface Mount | NO |
| Number of Pins | 14 |
| Operating Temperature | 0°C~70°C |
| Packaging | Tube |
| Series | LinCMOS™ |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 14 |
| ECCN Code | EAR99 |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Subcategory | Operational Amplifier |
| Terminal Position | DUAL |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 4 |
| Supply Voltage | 5V |
| Base Part Number | TLC254 |
| Pin Count | 14 |
| Operating Supply Voltage | 8V |
| Number of Circuits | 4 |
| Operating Supply Current | 4.5mA |
| Nominal Supply Current | 8mA |
| Slew Rate | 5.3V/μs |
| Architecture | VOLTAGE-FEEDBACK |
| Amplifier Type | General Purpose |
| Common Mode Rejection Ratio | 65 dB |
| Current - Input Bias | 0.7pA |
| Voltage - Supply, Single/Dual (±) | 1.4V~16V ±0.7V~8V |
| Input Offset Voltage (Vos) | 390μV |
| Bandwidth | 1.7MHz |
| Gain Bandwidth Product | 2.2MHz |
| Unity Gain BW-Nom | 1700 kHz |
| Voltage Gain | 87.23dB |
| Average Bias Current-Max (IIB) | 0.00006μA |
| Low-Offset | NO |
| Frequency Compensation | YES |
| Low-Bias | YES |
| Micropower | NO |
| Bias Current-Max (IIB) @25C | 0.00006μA |
| Programmable Power | NO |
| Nominal Gain Bandwidth Product | 1.7MHz |
| Max I/O Voltage | 2mV |
| Power | NO |
| Input Offset Current-Max (IIO) | 0.0006μA |
| Height | 5.08mm |
| Length | 19.3mm |
| Width | 6.35mm |
| Thickness | 3.9mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
TLC254BCN Overview
A 14-DIP (0.300, 7.62mm) case is used to package the op amp. An op amp of this type is a General Purpose-type. There is a Tube case that is delivered with the instrumentation amplifiers. During the past two weeks, there have been close to 14 terminations. Buffer amplifier has a total of 14 pins. It would be helpful if you could remember that this op amp ic should be powered by an 5V battery. A type of Operational Amplifier buffer op amp is what this device is specifically, to be more precise. Linear amplifier includes 14 pins. The input offset voltage is 390μV. This electrical part should be mounted using type Through Hole. In terms of operating temperatures, this buffer amplifier works very well at a temperature of around 0°C~70°C . A supply current of 4.5mA can be used to operate this linear amplifier. 87.23dB should be the voltage gain. There are 4 circuits on op amps. The operating supply voltage of instrumentation amplifier is rated 8V voltage. The LinCMOS? represents the op amp's series number.
TLC254BCN Features
14 Pins
supply voltage of 5V
87.23dB voltage gain
TLC254BCN Applications
There are a lot of Texas Instruments TLC254BCN Instrumentational OP Amps applications.
- Precision measurement
- Displayers for aircraft and air transportation control systems
- Thermocouples
- Scintillation detectors
- Laptop
- Automotive sensors
- Addition operation circuits
- High-frequency data acquisition systems
- Professional videography
- PDA
