TLC25L2CD
| Parameters | |
|---|---|
| Input Offset Voltage (Vos) | 10mV |
| Bandwidth | 85 kHz |
| Gain Bandwidth Product | 110kHz |
| Unity Gain BW-Nom | 85 kHz |
| Voltage Gain | 116.9dB |
| Average Bias Current-Max (IIB) | 0.00006μA |
| Low-Offset | NO |
| Frequency Compensation | YES |
| Voltage - Input Offset | 1.1mV |
| Low-Bias | YES |
| Micropower | YES |
| Bias Current-Max (IIB) @25C | 0.00006μA |
| Programmable Power | NO |
| Nominal Gain Bandwidth Product | 85 kHz |
| Max I/O Voltage | 10mV |
| Input Offset Current-Max (IIO) | 0.00006μA |
| Height | 1.75mm |
| Length | 4.9mm |
| Width | 3.91mm |
| Thickness | 1.58mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 1 week ago) |
| Mounting Type | Surface Mount |
| Package / Case | 8-SOIC (0.154, 3.90mm Width) |
| Surface Mount | YES |
| Number of Pins | 8 |
| Operating Temperature | 0°C~70°C |
| Packaging | Tube |
| Series | LinCMOS™ |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Subcategory | Operational Amplifier |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 2 |
| Supply Voltage | 5V |
| Base Part Number | TLC25 |
| Pin Count | 8 |
| Number of Elements | 2 |
| Power Supplies | 1.4/16V |
| Operating Supply Current | 29μA |
| Nominal Supply Current | 46μA |
| Power Dissipation | 725mW |
| Slew Rate | 0.05V/μs |
| Architecture | VOLTAGE-FEEDBACK |
| Amplifier Type | General Purpose |
| Common Mode Rejection Ratio | 65 dB |
| Current - Input Bias | 0.7pA |
| Voltage - Supply, Single/Dual (±) | 1.4V~16V ±0.7V~8V |
TLC25L2CD Overview
Packaged in a 8-SOIC (0.154, 3.90mm Width) case, the buffer op amp is ready to use. This is a General Purpose type op amp. Linear amplifier is delivered in a Tube case. It is estimated that there will be at least 8 terminations this year. It consists of a total of 8 pins in total. Please take in mind that op amp should be run at 5V. In order to be more specific, this instrumentation amplifier is one of the types of Operational Amplifier devices. Linear amplifier includes 8 pins. Op amp rates 10mV as input offset voltage. This electronic part is best mounted with type Surface Mount. With regard to operating temperature, op amp ranges 0°C~70°C. In order for this instrumentation amplifier to operate, the supply current needs to be between 29μA and 10 . 116.9dB should be the voltage gain. According to the specifications of the buffer op amp, the operating supply voltage is rated at 2. This buffer amplifier is assigned within the LinCMOS? series by its manufacturer.
TLC25L2CD Features
8 Pins
supply voltage of 5V
116.9dB voltage gain
TLC25L2CD Applications
There are a lot of Texas Instruments TLC25L2CD Instrumentational OP Amps applications.
- Communication device
- Tablets
- High speed sample
- Multimedia playback equipment
- Large motor controllers
- Proportional operation circuits
- earphone
- Micro signal measurement
- Industrial control system
- pH (acidity)
