TLC25L4CD
| Parameters | |
|---|---|
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 14 |
| ECCN Code | EAR99 |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Subcategory | Operational Amplifier |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 4 |
| Supply Voltage | 5V |
| Terminal Pitch | 1.27mm |
| Base Part Number | TLC25 |
| Pin Count | 14 |
| Operating Supply Voltage | 8V |
| Number of Circuits | 4 |
| Operating Supply Current | 57μA |
| Nominal Supply Current | 132μA |
| Power Dissipation | 725mW |
| Slew Rate | 0.05V/μs |
| Architecture | VOLTAGE-FEEDBACK |
| Amplifier Type | General Purpose |
| Common Mode Rejection Ratio | 65 dB |
| Current - Input Bias | 0.7pA |
| Voltage - Supply, Single/Dual (±) | 1.4V~16V ±0.7V~8V |
| Input Offset Voltage (Vos) | 1.1mV |
| Bandwidth | 85 kHz |
| Gain Bandwidth Product | 110kHz |
| Unity Gain BW-Nom | 85 kHz |
| Voltage Gain | 114.32dB |
| Average Bias Current-Max (IIB) | 0.00006μA |
| Low-Offset | NO |
| Frequency Compensation | YES |
| Low-Bias | YES |
| Micropower | YES |
| Bias Current-Max (IIB) @25C | 0.00006μA |
| Programmable Power | NO |
| Nominal Gain Bandwidth Product | 85 kHz |
| Max I/O Voltage | 10mV |
| Input Offset Current-Max (IIO) | 0.0006μA |
| Height | 1.75mm |
| Length | 8.65mm |
| Width | 3.91mm |
| Thickness | 1.58mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 5 days ago) |
| Mounting Type | Surface Mount |
| Package / Case | 14-SOIC (0.154, 3.90mm Width) |
| Surface Mount | YES |
| Number of Pins | 14 |
| Operating Temperature | 0°C~70°C |
| Packaging | Tube |
| Series | LinCMOS™ |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
TLC25L4CD Overview
There is a 14-SOIC (0.154, 3.90mm Width) case package that contains the instrumentation amplifiers. General Purpose-type instrumentation amplifiers are used in this application. The case in which buffer amplifier is delivered is called a Tube case. A total of 14 terminations have been reported in the past few weeks. A total of 14 pins are attached to buffer op amp. It would be helpful if you could remember that this op amp ic should be powered by an 5V battery. Instrumentation amplifier is a part of Operational Amplifier. In total, the buffer amplifier consists of 14 pins. The input offset voltage is 1.1mV. Surface Mount is the recommended mounting type for this linear amplifier. In terms of operating temperatures, this buffer amplifier works very well at a temperature of around 0°C~70°C . Using a supply current of 57μA , this buffer op amp will be able to operate. Keeping the voltage gain at 114.32dB is the best course of action. This op amp ic has 4 circuits. The operating supply voltage of instrumentation amplifier is rated 8V voltage. In this case, LinCMOS? represents the instrumentation amplifiers' series number.
TLC25L4CD Features
14 Pins
supply voltage of 5V
114.32dB voltage gain
TLC25L4CD Applications
There are a lot of Texas Instruments TLC25L4CD Instrumentational OP Amps applications.
- High/low-pass filter circuit
- ECG equipment
- Power transmission
- Medical instruments
- High gain DC amplifier
- Power control
- single/dual op amp sum and difference circuits
- Ultrasound transducers
- Industrial applications including automation
- E-book readers
