TLC25M2ACP
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 1 week ago) |
| Mounting Type | Through Hole |
| Package / Case | 8-DIP (0.300, 7.62mm) |
| Surface Mount | NO |
| Number of Pins | 8 |
| Operating Temperature | 0°C~70°C |
| Packaging | Tube |
| Series | LinCMOS™ |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Subcategory | Operational Amplifier |
| Terminal Position | DUAL |
| Number of Functions | 2 |
| Supply Voltage | 5V |
| Base Part Number | TLC25 |
| Pin Count | 8 |
| Power Supplies | 1.4/16V |
| Number of Channels | 2 |
| Operating Supply Current | 285μA |
| Nominal Supply Current | 600μA |
| Slew Rate | 0.62V/μs |
| Architecture | VOLTAGE-FEEDBACK |
| Amplifier Type | General Purpose |
| Common Mode Rejection Ratio | 65 dB |
| Current - Input Bias | 0.7pA |
| Voltage - Supply, Single/Dual (±) | 1.4V~16V ±0.7V~8V |
| Input Offset Voltage (Vos) | 900μV |
| Bandwidth | 525 kHz |
| Gain Bandwidth Product | 635kHz |
| Unity Gain BW-Nom | 525 kHz |
| Voltage Gain | 104.61dB |
| Average Bias Current-Max (IIB) | 0.00006μA |
| Low-Offset | NO |
| Frequency Compensation | YES |
| Low-Bias | YES |
| Micropower | YES |
| Bias Current-Max (IIB) @25C | 0.00006μA |
| Programmable Power | NO |
| Nominal Gain Bandwidth Product | 525 kHz |
| Max I/O Voltage | 5mV |
| Power | NO |
| Input Offset Current-Max (IIO) | 0.00006μA |
| Height | 5.08mm |
| Length | 9.81mm |
| Width | 6.35mm |
| Thickness | 3.9mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
TLC25M2ACP Overview
Packaging for the buffer amplifier is in the form of a 8-DIP (0.300, 7.62mm) case. An op amp of this type is a General Purpose-type. A Tube case is used to deliver the buffer op amp. There is a growing number of terminations approaching the number of 8. Buffer amplifier has a total of 8 pins on it. It is important to remember that this op amp should be operated at a voltage of 5V volts. It should be noted that this op amp is a type of Operational Amplifier device. 8 pins are located on the operational amplifiers. The input offset voltage is 900μV. The mounting type that is recommended for this electrical part is Through Hole. In terms of operating temperature, this instrumentation amplifier performs well at a temperature of about 0°C~70°C . Operational amplifier can operate supply current at 285μA. 104.61dB should be the voltage gain. Op amp ic has 2 channels. As the name implies, LinCMOS? refers to the series of the buffer op amp.
TLC25M2ACP Features
8 Pins
supply voltage of 5V
104.61dB voltage gain
TLC25M2ACP Applications
There are a lot of Texas Instruments TLC25M2ACP Instrumentational OP Amps applications.
- Power control
- Mobile phone
- Video amplifiers
- Portable docking station
- Test and measurement instruments
- Video conversion and routing
- Cinema or auditorium audio system
- Signal filtering
- RF cable systems
- Computer workstations
