TLC25M2CP
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 1 week ago) |
| Mount | Through Hole |
| Mounting Type | Through Hole |
| Package / Case | 8-DIP (0.300, 7.62mm) |
| Number of Pins | 8 |
| Operating Temperature | 0°C~70°C |
| Packaging | Tube |
| Series | LinCMOS™ |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Subcategory | Operational Amplifier |
| Terminal Position | DUAL |
| Number of Functions | 2 |
| Supply Voltage | 5V |
| Base Part Number | TLC25 |
| Pin Count | 8 |
| Power Supplies | 1.4/16V |
| Number of Circuits | 2 |
| Operating Supply Current | 285μA |
| Nominal Supply Current | 600μA |
| Slew Rate | 0.62V/μs |
| Architecture | VOLTAGE-FEEDBACK |
| Amplifier Type | General Purpose |
| Common Mode Rejection Ratio | 65 dB |
| Current - Input Bias | 0.7pA |
| Voltage - Supply, Single/Dual (±) | 1.4V~16V ±0.7V~8V |
| Input Offset Voltage (Vos) | 1.1mV |
| Bandwidth | 525 kHz |
| Gain Bandwidth Product | 635kHz |
| Unity Gain BW-Nom | 525 kHz |
| Voltage Gain | 104.61dB |
| Average Bias Current-Max (IIB) | 0.00006μA |
| Low-Offset | NO |
| Frequency Compensation | YES |
| Low-Bias | YES |
| Micropower | YES |
| Bias Current-Max (IIB) @25C | 0.00006μA |
| Programmable Power | NO |
| Power | NO |
| Input Offset Current-Max (IIO) | 0.00006μA |
| Height | 5.08mm |
| Length | 9.81mm |
| Width | 6.35mm |
| Thickness | 3.9mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
TLC25M2CP Overview
Op amp is packaged in 8-DIP (0.300, 7.62mm) case. An op amp ic of the General Purpose type. There is a Tube case that is delivered with the instrumentation amplifiers. A total of 8 terminations have been reported in the past few weeks. In total, there are 8 pins on this op amp ic. Please take in mind that op amp should be run at 5V. In more specific terms, this linear amplifier can be categoriOperational Amplifiered as a Operational Amplifier-type device. The buffer op amp includes 8 pins. Regarding input offset voltage, op amp rates 1.1mV. Through Hole is the recommended mounting type of operational amplifiers. With regard to operating temperature, op amp ranges 0°C~70°C. In order for this instrumentation amplifier to operate, the supply current needs to be between 285μA and 10 . You should keep the voltage gain at 104.61dB for the time being. This op amp ic has 2 circuits. The LinCMOS? indicates the series number of the op amp.
TLC25M2CP Features
8 Pins
supply voltage of 5V
104.61dB voltage gain
TLC25M2CP Applications
There are a lot of Texas Instruments TLC25M2CP Instrumentational OP Amps applications.
- Inverse/same-phase proportional circuit
- Automation control systems
- Communication
- Multimedia playback equipment
- Tablets
- Industrial control system
- Television broadcasting equipment
- Measurements of Wheatstone bridge
- Automotive sensors
- RF cable systems
