TLC2652AC-8D
| Parameters | |
|---|---|
| Input Offset Voltage (Vos) | 1μV |
| Bandwidth | 1.9MHz |
| Neg Supply Voltage-Nom (Vsup) | -5V |
| Unity Gain BW-Nom | 1900 kHz |
| Voltage Gain | 150dB |
| Average Bias Current-Max (IIB) | 0.00006μA |
| Low-Offset | YES |
| Frequency Compensation | YES |
| Supply Voltage Limit-Max | 8V |
| Voltage - Input Offset | 0.5μV |
| Low-Bias | YES |
| Micropower | NO |
| Bias Current-Max (IIB) @25C | 0.00006μA |
| Programmable Power | NO |
| Dual Supply Voltage | 5V |
| Nominal Gain Bandwidth Product | 1.9MHz |
| Max I/O Voltage | 1μV |
| Input Offset Current-Max (IIO) | 0.00006μA |
| Height | 1.75mm |
| Length | 4.9mm |
| Width | 3.91mm |
| Thickness | 1.58mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 1 day ago) |
| Mounting Type | Surface Mount |
| Package / Case | 8-SOIC (0.154, 3.90mm Width) |
| Surface Mount | YES |
| Number of Pins | 8 |
| Operating Temperature | 0°C~70°C |
| Packaging | Tube |
| Series | LinCMOS™ |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Subcategory | Operational Amplifier |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Base Part Number | TLC2652 |
| Pin Count | 8 |
| Operating Supply Voltage | 8V |
| Number of Elements | 2 |
| Number of Channels | 1 |
| Operating Supply Current | 1.5mA |
| Nominal Supply Current | 2.4mA |
| Power Dissipation | 725mW |
| Slew Rate | 3.1V/μs |
| Architecture | CHOPPER-STAB |
| Amplifier Type | Zero-Drift |
| Common Mode Rejection Ratio | 120 dB |
| Current - Input Bias | 4pA |
| Voltage - Supply, Single/Dual (±) | 3.8V~16V ±1.9V~8V |
| Output Current per Channel | 50mA |
TLC2652AC-8D Overview
Packaging for the buffer amplifier is in the form of a 8-SOIC (0.154, 3.90mm Width) case. An op amp ic of the Zero-Drift type. There is a Tube case that is delivered with the instrumentation amplifiers. The number of terminations approaches 8. In this case, there are 8 pins on the board. This linear amplifier should be powered by an 5V battery. Instrumentation amplifier is a part of Operational Amplifier. The op amp ic has an array of 8 pins on it. Op amp rates 1μV as input offset voltage. For this electronic part, it is recommended that you mount it with type Surface Mount. In terms of operating temperatures, this buffer amplifier works very well at a temperature of around 0°C~70°C . A supply current of 1.5mA can be used to operate this linear amplifier. Maintain 150dB as the voltage gain. The op amp ic has 1 channels on it. There is an operating supply voltage rating of 2 for this operational amplifier, which is rated at the manufacturer. The operating supply voltage of the buffer op amp is rated at 8V. This buffer amplifier is assigned within the LinCMOS? series by its manufacturer.
TLC2652AC-8D Features
8 Pins
supply voltage of 5V
150dB voltage gain
TLC2652AC-8D Applications
There are a lot of Texas Instruments TLC2652AC-8D Instrumentational OP Amps applications.
- Thermocouples
- Ultrasound transducers
- Strain gauges
- High gain DC amplifier
- Proportional operation circuits
- Industrial control system
- Portable electronic products powered by batteries
- Differentiator circuits
- Large motor controllers
- Commercial audio systems
