TLC2652ACP

1 Channels 50mA per Channel 4pA 120 dB Instrumentational OP Amps 0.00006μA 8V 3.8V~16V ±1.9V~8V TLC2652 8 Pins 8-DIP (0.300, 7.62mm)

Manufacturer: Texas Instruments
Nocochips NO: 815-TLC2652ACP
Package: 8-DIP (0.300, 7.62mm)
Datasheet: -
Stock: 885
Description: 1 Channels 50mA per Channel 4pA 120 dB Instrumentational OP Amps 0.00006μA 8V 3.8V~16V ±1.9V~8V TLC2652 8 Pins 8-DIP (0.300, 7.62mm)(Kg)

Inquiry Now

Details

Tags

Parameters
Factory Lead Time	1 Week
Lifecycle Status	ACTIVE (Last Updated: 1 day ago)
Mounting Type	Through Hole
Package / Case	8-DIP (0.300, 7.62mm)
Surface Mount	NO
Number of Pins	8
Operating Temperature	0°C~70°C
Packaging	Tube
Series	LinCMOS™
JESD-609 Code	e4
Pbfree Code	yes
Part Status	Active
Moisture Sensitivity Level (MSL)	1 (Unlimited)
Number of Terminations	8
ECCN Code	EAR99
Terminal Finish	Nickel/Palladium/Gold (Ni/Pd/Au)
Subcategory	Operational Amplifier
Terminal Position	DUAL
Peak Reflow Temperature (Cel)	260
Number of Functions	1
Supply Voltage	5V
Base Part Number	TLC2652
Pin Count	8
Operating Supply Voltage	8V
Number of Elements	2
Number of Channels	1
Operating Supply Current	1.5mA
Nominal Supply Current	2.4mA
Power Dissipation	1W
Slew Rate	3.1V/μs
Architecture	CHOPPER-STAB
Amplifier Type	Zero-Drift
Common Mode Rejection Ratio	120 dB
Current - Input Bias	4pA
Voltage - Supply, Single/Dual (±)	3.8V~16V ±1.9V~8V
Output Current per Channel	50mA
Input Offset Voltage (Vos)	1μV
Bandwidth	1.9MHz
Neg Supply Voltage-Nom (Vsup)	-5V
Unity Gain BW-Nom	1900 kHz
Voltage Gain	150dB
Average Bias Current-Max (IIB)	0.00006μA
Low-Offset	YES
Frequency Compensation	YES
Supply Voltage Limit-Max	8V
Voltage - Input Offset	0.5μV
Low-Bias	YES
Micropower	NO
Bias Current-Max (IIB) @25C	0.00006μA
Programmable Power	NO
Dual Supply Voltage	5V
Nominal Gain Bandwidth Product	1.9MHz
Max I/O Voltage	1μV
Input Offset Current-Max (IIO)	0.00006μA
Height	5.08mm
Length	9.81mm
Width	6.35mm
Thickness	3.9mm
Radiation Hardening	No
REACH SVHC	No SVHC
RoHS Status	ROHS3 Compliant
Lead Free	Lead Free

TLC2652ACP Overview

In order to protect the op amps, a 8-DIP (0.300, 7.62mm) case is used. Op amps are Zero-Drift types of amplifier on the chip. Instrumentation amplifier is delivered in a Tube case. There is a growing number of terminations approaching the number of 8. The total number of pins on linear amplifier is 8. Please take in mind that op amp should be run at 5V. Instrumentation amplifier is a part of Operational Amplifier. 8 pins are available on the instrumentation amplifier. Op amp rates 1μV as input offset voltage. This electronic part is recommended for mounting type Through Hole. Regarding the operating temperature of this device, instrumentation amplifier performs well at a temperature of 0°C~70°C . This op amp can operate from a supply current at 1.5mA. 150dB should remain the voltage gain. Instrumentation amplifier has 1 channels on it. The total number of elements in this buffer amplifier is 2. The operating supply voltage of instrumentation amplifier is rated 8V voltage. As the name implies, LinCMOS? refers to the series of the buffer op amp.