TLC2652C-8D
| Parameters | |
|---|---|
| Input Offset Voltage (Vos) | 3μV |
| Bandwidth | 1.9MHz |
| Neg Supply Voltage-Nom (Vsup) | -5V |
| Unity Gain BW-Nom | 1900 kHz |
| Voltage Gain | 150dB |
| Average Bias Current-Max (IIB) | 0.00006μA |
| Low-Offset | YES |
| Frequency Compensation | YES |
| Supply Voltage Limit-Max | 8V |
| Voltage - Input Offset | 0.6μV |
| Low-Bias | YES |
| Micropower | NO |
| Bias Current-Max (IIB) @25C | 0.00006μA |
| Programmable Power | NO |
| Nominal Gain Bandwidth Product | 1.9MHz |
| Max I/O Voltage | 3μV |
| Input Offset Current-Max (IIO) | 0.00006μA |
| Height | 1.75mm |
| Length | 4.9mm |
| Width | 3.91mm |
| Thickness | 1.58mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 2 days ago) |
| Mounting Type | Surface Mount |
| Package / Case | 8-SOIC (0.154, 3.90mm Width) |
| Surface Mount | YES |
| Number of Pins | 8 |
| Operating Temperature | 0°C~70°C |
| Packaging | Tube |
| Series | LinCMOS™ |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Subcategory | Operational Amplifier |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Base Part Number | TLC2652 |
| Pin Count | 8 |
| Operating Supply Voltage | 8V |
| Number of Elements | 2 |
| Power Supplies | +-5V |
| Number of Circuits | 1 |
| Operating Supply Current | 1.5mA |
| Nominal Supply Current | 2.4mA |
| Power Dissipation | 725mW |
| Slew Rate | 3.1V/μs |
| Architecture | CHOPPER-STAB |
| Amplifier Type | Zero-Drift |
| Common Mode Rejection Ratio | 120 dB |
| Current - Input Bias | 4pA |
| Voltage - Supply, Single/Dual (±) | 3.8V~16V ±1.9V~8V |
| Output Current per Channel | 50mA |
TLC2652C-8D Overview
There is a 8-SOIC (0.154, 3.90mm Width) case package that contains the instrumentation amplifiers. Op amps are Zero-Drift types of amplifier on the chip. A Tube case is used to deliver the buffer op amp. During the past two weeks, there have been close to 8 terminations. There are a total of 8 pins on this op amp. Please take in mind that op amp should be run at 5V. In more specific terms, this linear amplifier can be categoriOperational Amplifiered as a Operational Amplifier-type device. There are 8 pins on this chip. As far as the input offset voltage is concerned, linear amplifier rates at 3μV. This electronic part is recommended for mounting type Surface Mount. In terms of operating temperature, this instrumentation amplifier performs well at a temperature of about 0°C~70°C . A supply current of 1.5mA can be used to operate this linear amplifier. There should be no change in the voltage gain. A instrumentation amplifier like this has 1 circuits. A voltage rating of 2 is indicated for the op amp's operating supply voltage. The operating supply voltage of the buffer op amp is rated at 8V. LinCMOS? corresponds to linear amplifier's series.
TLC2652C-8D Features
8 Pins
supply voltage of 5V
150dB voltage gain
TLC2652C-8D Applications
There are a lot of Texas Instruments TLC2652C-8D Instrumentational OP Amps applications.
- Oscilloscopes
- Power control
- Navigation
- Biopotential
- Polarized electrodes
- Band-stop filter
- earphone
- single/dual op amp sum and difference circuits
- Automotive sensors
- MP3
