Parameters |
Factory Lead Time |
1 Week |
Lifecycle Status |
ACTIVE (Last Updated: 1 week ago) |
Mounting Type |
Surface Mount |
Package / Case |
8-SOIC (0.154, 3.90mm Width) |
Surface Mount |
YES |
Number of Pins |
8 |
Operating Temperature |
-40°C~85°C |
Packaging |
Tube |
Series |
LinCMOS™ |
JESD-609 Code |
e4 |
Pbfree Code |
yes |
Part Status |
Active |
Moisture Sensitivity Level (MSL) |
1 (Unlimited) |
Number of Terminations |
8 |
ECCN Code |
EAR99 |
Terminal Finish |
Nickel/Palladium/Gold (Ni/Pd/Au) |
Subcategory |
Operational Amplifier |
Terminal Position |
DUAL |
Terminal Form |
GULL WING |
Peak Reflow Temperature (Cel) |
260 |
Number of Functions |
1 |
Supply Voltage |
5V |
Base Part Number |
TLC2652 |
Pin Count |
8 |
Operating Supply Voltage |
8V |
Number of Elements |
2 |
Power Supplies |
+-5V |
Number of Circuits |
1 |
Operating Supply Current |
1.5mA |
Nominal Supply Current |
2.4mA |
Power Dissipation |
725mW |
Slew Rate |
3.1V/μs |
Architecture |
CHOPPER-STAB |
Amplifier Type |
Zero-Drift |
Common Mode Rejection Ratio |
120 dB |
Current - Input Bias |
4pA |
Voltage - Supply, Single/Dual (±) |
3.8V~16V ±1.9V~8V |
Output Current per Channel |
50mA |
Input Offset Voltage (Vos) |
3μV |
Bandwidth |
1.9MHz |
Neg Supply Voltage-Nom (Vsup) |
-5V |
Unity Gain BW-Nom |
1900 kHz |
Voltage Gain |
150dB |
Average Bias Current-Max (IIB) |
0.00006μA |
Low-Offset |
YES |
Frequency Compensation |
YES |
Supply Voltage Limit-Max |
8V |
Voltage - Input Offset |
0.6μV |
Low-Bias |
YES |
Micropower |
NO |
Bias Current-Max (IIB) @25C |
0.00006μA |
Programmable Power |
NO |
Nominal Gain Bandwidth Product |
1.9MHz |
Max I/O Voltage |
3μV |
Input Offset Current-Max (IIO) |
0.00006μA |
Height |
1.75mm |
Length |
4.9mm |
Width |
3.91mm |
Thickness |
1.58mm |
Radiation Hardening |
No |
RoHS Status |
ROHS3 Compliant |
Lead Free |
Lead Free |
TLC2652I-8D Overview
There is a 8-SOIC (0.154, 3.90mm Width) case package that contains the instrumentation amplifiers. A Zero-Drift-type buffer amplifier is shown here. The case in which buffer amplifier is delivered is called a Tube case. It is estimated that there will be 8 terminations in the next few months. There are a total of 8 pins on this op amp. It would be helpful if you could remember that this op amp ic should be powered by an 5V battery. To be specific, this instrumentation amplifier is a type of Operational Amplifier. The buffer op amp includes 8 pins. In terms of input offset voltage, operational amplifier rates 3μV. For this electrical component, the recommended mounting type is Surface Mount, which is the most common. In terms of operating temperature, this instrumentation amplifier performs well at a temperature of about -40°C~85°C . In order for this instrumentation amplifier to operate, the supply current needs to be between 1.5mA and 10 . There should be no change in the voltage gain at 150dB. A instrumentation amplifier like this has 1 circuits. Depending on the chip's operating supply voltage, op amp ic has a rated voltage of 2. The operating supply voltage of the buffer op amp is rated at 8V. The LinCMOS? stands for the buffer op amp's serial number.
TLC2652I-8D Features
8 Pins
supply voltage of 5V
150dB voltage gain
TLC2652I-8D Applications
There are a lot of Texas Instruments TLC2652I-8D Instrumentational OP Amps applications.
- Instrumentation
- Ultrasound transducers
- Comparator
- Medical imaging
- PDA
- Laptop
- Home audio systems
- Radiation thermometry transducers
- Differentiator circuits
- Computer workstations