TLC2652IP
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 1 week ago) |
| Mounting Type | Through Hole |
| Package / Case | 8-DIP (0.300, 7.62mm) |
| Surface Mount | NO |
| Number of Pins | 8 |
| Operating Temperature | -40°C~85°C |
| Packaging | Tube |
| Series | LinCMOS™ |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Subcategory | Operational Amplifier |
| Terminal Position | DUAL |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Time@Peak Reflow Temperature-Max (s) | NOT SPECIFIED |
| Base Part Number | TLC2652 |
| Pin Count | 8 |
| Qualification Status | Not Qualified |
| Operating Supply Voltage | 8V |
| Number of Elements | 2 |
| Power Supplies | +-5V |
| Number of Circuits | 1 |
| Operating Supply Current | 1.5mA |
| Nominal Supply Current | 2.4mA |
| Power Dissipation | 1W |
| Slew Rate | 3.1V/μs |
| Architecture | CHOPPER-STAB |
| Amplifier Type | Zero-Drift |
| Common Mode Rejection Ratio | 120 dB |
| Current - Input Bias | 4pA |
| Voltage - Supply, Single/Dual (±) | 3.8V~16V ±1.9V~8V |
| Output Current per Channel | 50mA |
| Input Offset Voltage (Vos) | 3μV |
| Bandwidth | 1.9MHz |
| Neg Supply Voltage-Nom (Vsup) | -5V |
| Unity Gain BW-Nom | 1900 kHz |
| Voltage Gain | 150dB |
| Average Bias Current-Max (IIB) | 0.00006μA |
| Low-Offset | YES |
| Frequency Compensation | YES |
| Supply Voltage Limit-Max | 8V |
| Voltage - Input Offset | 0.6μV |
| Low-Bias | YES |
| Micropower | NO |
| Bias Current-Max (IIB) @25C | 0.00006μA |
| Programmable Power | NO |
| Nominal Gain Bandwidth Product | 1.9MHz |
| Max I/O Voltage | 3μV |
| Input Offset Current-Max (IIO) | 0.00006μA |
| Height | 5.08mm |
| Length | 9.81mm |
| Width | 6.35mm |
| Thickness | 3.9mm |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
TLC2652IP Overview
It is packaged in an 8-DIP (0.300, 7.62mm)-case that protects the operational amplifiers from damage. A Zero-Drift-type buffer amplifier is shown here. There is a Tube case that is delivered with the instrumentation amplifiers. In recent months, the number of terminations has approached 8. A total of 8 pins are attached to buffer op amp. I would like to remind you that this buffer op amp should be powered by an 5V battery. In order to be more specific, this instrumentation amplifier is one of the types of Operational Amplifier devices. Linear amplifier includes 8 pins. In terms of the input offset voltage, instrumentation amplifier rates at 3μV. This electronic part is recommended for mounting type Through Hole. In terms of operating temperatures, this buffer amplifier works very well at a temperature of around -40°C~85°C . Using an 1.5mA supply current, this operational amplifier ics can be operated. The voltage gain should stay at 150dB. On this instrumentation amplifier, there are 1 circuits that are connected together. The buffer op amp is rated for an operating voltage of 2 when it comes to the power supply. The operating supply voltage of the buffer op amp is rated at 8V. The LinCMOS? stands for the buffer op amp's serial number.
TLC2652IP Features
8 Pins
supply voltage of 5V
150dB voltage gain
TLC2652IP Applications
There are a lot of Texas Instruments TLC2652IP Instrumentational OP Amps applications.
- Displayers for aircraft and air transportation control systems
- ECG equipment
- Signal operation
- Portable electronic products powered by batteries
- Division circuits
- Video conversion and routing
- Fast A/D and D/A converters
- Communication device
- Measurements of Wheatstone bridge
- Logarithmic operation circuits
