Parameters |
Factory Lead Time |
1 Week |
Lifecycle Status |
ACTIVE (Last Updated: 1 week ago) |
Mounting Type |
Through Hole |
Package / Case |
8-DIP (0.300, 7.62mm) |
Surface Mount |
NO |
Number of Pins |
8 |
Operating Temperature |
0°C~70°C |
Packaging |
Tube |
Series |
LinCMOS™ |
JESD-609 Code |
e4 |
Pbfree Code |
yes |
Part Status |
Active |
Moisture Sensitivity Level (MSL) |
1 (Unlimited) |
Number of Terminations |
8 |
ECCN Code |
EAR99 |
Terminal Finish |
Nickel/Palladium/Gold (Ni/Pd/Au) |
Subcategory |
Operational Amplifier |
Terminal Position |
DUAL |
Peak Reflow Temperature (Cel) |
260 |
Number of Functions |
1 |
Supply Voltage |
5V |
Terminal Pitch |
2.54mm |
Base Part Number |
TLC2654 |
Pin Count |
8 |
Operating Supply Voltage |
8V |
Power Supplies |
+-5V |
Number of Channels |
1 |
Operating Supply Current |
1.5mA |
Nominal Supply Current |
2.4mA |
Power Dissipation |
1W |
Slew Rate |
3.7V/μs |
Architecture |
CHOPPER-STAB |
Amplifier Type |
General Purpose |
Common Mode Rejection Ratio |
110 dB |
Current - Input Bias |
50pA |
Voltage - Supply, Single/Dual (±) |
4.6V~16V ±2.3V~8V |
Output Current per Channel |
50mA |
Input Offset Voltage (Vos) |
10μV |
Bandwidth |
1.9MHz |
Neg Supply Voltage-Nom (Vsup) |
-5V |
Unity Gain BW-Nom |
1900 kHz |
Voltage Gain |
155dB |
Low-Offset |
YES |
Frequency Compensation |
YES |
Supply Voltage Limit-Max |
8V |
Voltage - Input Offset |
4μV |
Low-Bias |
YES |
Micropower |
NO |
Bias Current-Max (IIB) @25C |
0.00006μA |
Programmable Power |
NO |
Nominal Gain Bandwidth Product |
1.9MHz |
Max I/O Voltage |
10μV |
Input Offset Current-Max (IIO) |
0.00006μA |
Height |
5.08mm |
Length |
9.81mm |
Width |
6.35mm |
Thickness |
3.9mm |
Radiation Hardening |
No |
REACH SVHC |
No SVHC |
RoHS Status |
ROHS3 Compliant |
Lead Free |
Lead Free |
TLC2654ACP Overview
It is packaged in an 8-DIP (0.300, 7.62mm)-case that protects the operational amplifiers from damage. This is a General Purpose type op amp. Upon delivery, op amp ic is packaged in a Tube case. We are approaching the 8h termination of the year. It consists of a total of 8 pins in total. It is important to remember that this op amp should be operated at a voltage of 5V volts. It should be noted that this type of buffer amplifier is exactly what is known as a Operational Amplifier device. 8 pins are included on the operational amplifiers. In terms of the input offset voltage, instrumentation amplifier rates at 10μV. For this electrical component, Through Hole is the recommended mounting type. With regard to operating temperature, this op amp functions well at 0°C~70°C. An 1.5mA volt supply current is needed for this linear amplifier to operate. 155dB should be the voltage gain. As far as the device is concerned, buffer amplifier has 1 channels. The operating supply voltage of instrumentation amplifier is rated 8V voltage. In this case, LinCMOS? represents the instrumentation amplifiers' series number.
TLC2654ACP Features
8 Pins
supply voltage of 5V
155dB voltage gain
TLC2654ACP Applications
There are a lot of Texas Instruments TLC2654ACP Instrumentational OP Amps applications.
- Instrumentation
- Communication
- E-book readers
- Semiconductor detectors
- Professional videography
- Communication device
- Comparator
- Signal operation
- Video data acquisition
- Hand-held batteries