TLC2654AIP
| Parameters | |
|---|---|
| Current - Input Bias | 50pA |
| Voltage - Supply, Single/Dual (±) | 4.6V~16V ±2.3V~8V |
| Output Current per Channel | 50mA |
| Input Offset Voltage (Vos) | 10μV |
| Bandwidth | 1.9MHz |
| Neg Supply Voltage-Nom (Vsup) | -5V |
| Unity Gain BW-Nom | 1900 kHz |
| Voltage Gain | 155dB |
| Average Bias Current-Max (IIB) | 0.0002μA |
| Low-Offset | YES |
| Frequency Compensation | YES |
| Supply Voltage Limit-Max | 8V |
| Voltage - Input Offset | 4μV |
| Low-Bias | YES |
| Micropower | NO |
| Bias Current-Max (IIB) @25C | 0.00006μA |
| Programmable Power | NO |
| Nominal Gain Bandwidth Product | 1.9MHz |
| Max I/O Voltage | 10μV |
| Input Offset Current-Max (IIO) | 0.00006μA |
| Height | 5.08mm |
| Length | 9.81mm |
| Width | 6.35mm |
| Thickness | 3.9mm |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 1 week ago) |
| Mounting Type | Through Hole |
| Package / Case | 8-DIP (0.300, 7.62mm) |
| Surface Mount | NO |
| Number of Pins | 8 |
| Operating Temperature | -40°C~85°C |
| Packaging | Tube |
| Series | LinCMOS™ |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Subcategory | Operational Amplifier |
| Terminal Position | DUAL |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Terminal Pitch | 2.54mm |
| Time@Peak Reflow Temperature-Max (s) | NOT SPECIFIED |
| Base Part Number | TLC2654 |
| Pin Count | 8 |
| Qualification Status | Not Qualified |
| Operating Supply Voltage | 8V |
| Number of Elements | 1 |
| Power Supplies | +-5V |
| Operating Supply Current | 1.5mA |
| Nominal Supply Current | 2.4mA |
| Power Dissipation | 1W |
| Slew Rate | 3.7V/μs |
| Architecture | CHOPPER-STAB |
| Amplifier Type | General Purpose |
| Common Mode Rejection Ratio | 110 dB |
TLC2654AIP Overview
Packaged in a 8-DIP (0.300, 7.62mm) case, the buffer op amp is ready to use. General Purpose-type instrumentation amplifiers are used in this application. The op amp is delivered to you in a Tube case. In recent months, the number of terminations has approached 8. In this case, there are 8 pins on the board. The linear amplifier should be run at 5V at all times, so please keep that in mind when using it. A type of Operational Amplifier buffer op amp is what this device is specifically, to be more precise. There are 8 pins on this chip. Op amp rates 10μV as input offset voltage. Through Hole is the recommended mounting type for this linear amplifier. It is important to note that this linear amplifier works well at a temperature of -40°C~85°C when it comes to operating temperatureOperational amplifier can operate supply current at 1.5mA. You should keep the voltage gain at 155dB for the time being. Op amp has total of 1 elements. The operating supply voltage of the buffer op amp is rated at 8V. In this case, LinCMOS? represents the instrumentation amplifiers' series number.
TLC2654AIP Features
8 Pins
supply voltage of 5V
155dB voltage gain
TLC2654AIP Applications
There are a lot of Texas Instruments TLC2654AIP Instrumentational OP Amps applications.
- Automation control systems
- High gain DC amplifier
- Blood pressure sensors
- Information processing
- Micro signal measurement
- Subtraction operation circuits
- Portable docking station
- Division circuits
- single/dual op amp sum and difference circuits
- Video conversion and routing
