TLC2654C-14DR
| Parameters | |
|---|---|
| Architecture | CHOPPER-STAB |
| Amplifier Type | General Purpose |
| Common Mode Rejection Ratio | 105 dB |
| Current - Input Bias | 50pA |
| Voltage - Supply, Single/Dual (±) | 4.6V~16V ±2.3V~8V |
| Output Current per Channel | 50mA |
| Input Offset Voltage (Vos) | 20μV |
| Bandwidth | 1.9MHz |
| Neg Supply Voltage-Nom (Vsup) | -5V |
| Unity Gain BW-Nom | 1900 kHz |
| Voltage Gain | 155dB |
| Low-Offset | YES |
| Frequency Compensation | YES |
| Supply Voltage Limit-Max | 8V |
| Voltage - Input Offset | 5μV |
| Low-Bias | YES |
| Micropower | NO |
| Bias Current-Max (IIB) @25C | 0.00006μA |
| Programmable Power | NO |
| Nominal Gain Bandwidth Product | 1.9MHz |
| Max I/O Voltage | 20μV |
| Input Offset Current-Max (IIO) | 0.00006μA |
| Height | 1.75mm |
| Length | 8.65mm |
| Width | 3.91mm |
| Thickness | 1.58mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 3 days ago) |
| Mounting Type | Surface Mount |
| Package / Case | 14-SOIC (0.154, 3.90mm Width) |
| Surface Mount | YES |
| Number of Pins | 14 |
| Operating Temperature | 0°C~70°C |
| Packaging | Tape & Reel (TR) |
| Series | LinCMOS™ |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 14 |
| ECCN Code | EAR99 |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Subcategory | Operational Amplifier |
| Packing Method | TR |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Base Part Number | TLC2654 |
| Pin Count | 14 |
| Operating Supply Voltage | 8V |
| Number of Elements | 1 |
| Power Supplies | +-5V |
| Operating Supply Current | 1.5mA |
| Nominal Supply Current | 2.4mA |
| Power Dissipation | 950mW |
| Slew Rate | 3.7V/μs |
TLC2654C-14DR Overview
There is a 14-SOIC (0.154, 3.90mm Width) case package that contains the instrumentation amplifiers. A General Purpose-type buffer amplifier is shown here. As far as the packaging is concerned, buffer op amp is delivered in a Tape & Reel (TR) case. The number of terminations is approaching the 14 mark. It consists of a total of 14 pins in total. This linear amplifier should be powered by an 5V battery. Instrumentation amplifier is a part of Operational Amplifier. The buffer op amp includes 14 pins. Regarding input offset voltage, buffer amplifier rates 20μV voltage. For this electrical component, the recommended mounting type is Surface Mount, which is the most common. In terms of operating temperatures, this buffer amplifier works very well at a temperature of around 0°C~70°C . An 1.5mA volt supply current is needed for this linear amplifier to operate. You should keep the voltage gain at 155dB for the time being. The total number of elements in this buffer amplifier is 1. The operating supply voltage of instrumentation amplifier is rated 8V voltage. To pack the operational amplifier ics, TR is adopted as the packing method. The LinCMOS? indicates the series number of the op amp.
TLC2654C-14DR Features
14 Pins
supply voltage of 5V
155dB voltage gain
TLC2654C-14DR Applications
There are a lot of Texas Instruments TLC2654C-14DR Instrumentational OP Amps applications.
- Television
- Multimedia playback equipment
- Fast A/D and D/A converters
- Comparator
- Communication
- Thermocouples
- Video conversion and routing
- Radar
- earphone
- Polarized electrodes
