TLC2654CN
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 1 week ago) |
| Mounting Type | Through Hole |
| Package / Case | 14-DIP (0.300, 7.62mm) |
| Surface Mount | NO |
| Number of Pins | 14 |
| Operating Temperature | 0°C~70°C |
| Packaging | Tube |
| Series | LinCMOS™ |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 14 |
| ECCN Code | EAR99 |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Subcategory | Operational Amplifier |
| Terminal Position | DUAL |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Terminal Pitch | 2.54mm |
| Base Part Number | TLC2654 |
| Pin Count | 14 |
| Operating Supply Voltage | 8V |
| Power Supplies | +-5V |
| Number of Channels | 1 |
| Operating Supply Current | 1.5mA |
| Nominal Supply Current | 2.4mA |
| Power Dissipation | 1.15W |
| Slew Rate | 3.7V/μs |
| Architecture | CHOPPER-STAB |
| Amplifier Type | General Purpose |
| Common Mode Rejection Ratio | 105 dB |
| Current - Input Bias | 50pA |
| Voltage - Supply, Single/Dual (±) | 4.6V~16V ±2.3V~8V |
| Output Current per Channel | 50mA |
| Input Offset Voltage (Vos) | 20μV |
| Bandwidth | 1.9MHz |
| Neg Supply Voltage-Nom (Vsup) | -5V |
| Unity Gain BW-Nom | 1900 kHz |
| Voltage Gain | 155dB |
| Low-Offset | YES |
| Frequency Compensation | YES |
| Supply Voltage Limit-Max | 8V |
| Voltage - Input Offset | 5μV |
| Low-Bias | YES |
| Micropower | NO |
| Bias Current-Max (IIB) @25C | 0.00006μA |
| Programmable Power | NO |
| Nominal Gain Bandwidth Product | 1.9MHz |
| Max I/O Voltage | 20μV |
| Input Offset Current-Max (IIO) | 0.00006μA |
| Height | 5.08mm |
| Length | 19.3mm |
| Width | 6.35mm |
| Thickness | 3.9mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
TLC2654CN Overview
The linear amplifier is packaged in a 14-DIP (0.300, 7.62mm) case. Op amps are General Purpose types of amplifier on the chip. It comes in a Tube case, which protects instrumentation amplifier from damage during delivery. We are approaching the 14h termination of the year. Buffer amplifier has a total of 14 pins. Please take in mind that this instrumentation amplifier should be run at 5V. This particular linear amplifier is a type of Operational Amplifier device, to be precise. It has 14 pins that make up the linear amplifier. In terms of the input offset voltage, instrumentation amplifier rates at 20μV. For this electronic part, it is recommended that you mount it with type Through Hole. In terms of operating temperature, this instrumentation amplifier is well suited to a temperature range of 0°C~70°C. Using an 1.5mA supply current, this operational amplifier ics can be operated. There should be no change in the voltage gain. Buffer op amp is equipped with 1 channels on the device. The operating supply voltage of instrumentation amplifier is rated 8V voltage. Buffer op amp series numbers are indicated by the LinCMOS?.
TLC2654CN Features
14 Pins
supply voltage of 5V
155dB voltage gain
TLC2654CN Applications
There are a lot of Texas Instruments TLC2654CN Instrumentational OP Amps applications.
- Addition operation circuits
- Oscilloscopes
- Integrator circuits
- Subtraction operation circuits
- Large motor controllers
- Cinema or auditorium audio system
- Precision measurement
- pH (acidity)
- Communication device
- Wireless base stations
