TLC2654IP

50mA per Channel 50pA 105 dB Instrumentational OP Amps 0.0002μA 8V 4.6V~16V ±2.3V~8V TLC2654 8 Pins 8-DIP (0.300, 7.62mm)

Manufacturer: Texas Instruments
Nocochips NO: 815-TLC2654IP
Package: 8-DIP (0.300, 7.62mm)
Datasheet: -
Stock: 225
Description: 50mA per Channel 50pA 105 dB Instrumentational OP Amps 0.0002μA 8V 4.6V~16V ±2.3V~8V TLC2654 8 Pins 8-DIP (0.300, 7.62mm)(Kg)

Inquiry Now

Details

Tags

Parameters
Surface Mount	NO
Number of Pins	8
Operating Temperature	-40°C~85°C
Packaging	Tube
Series	LinCMOS™
JESD-609 Code	e4
Pbfree Code	yes
Part Status	Active
Moisture Sensitivity Level (MSL)	1 (Unlimited)
Number of Terminations	8
ECCN Code	EAR99
Subcategory	Operational Amplifier
Terminal Position	DUAL
Number of Functions	1
Supply Voltage	5V
Terminal Pitch	2.54mm
Base Part Number	TLC2654
Pin Count	8
Operating Supply Voltage	8V
Number of Elements	1
Operating Supply Current	1.5mA
Nominal Supply Current	2.4mA
Power Dissipation	1W
Slew Rate	3.7V/μs
Architecture	CHOPPER-STAB
Amplifier Type	General Purpose
Common Mode Rejection Ratio	105 dB
Current - Input Bias	50pA
Voltage - Supply, Single/Dual (±)	4.6V~16V ±2.3V~8V
Output Current per Channel	50mA
Input Offset Voltage (Vos)	20μV
Bandwidth	1.9MHz
Neg Supply Voltage-Nom (Vsup)	-5V
Unity Gain BW-Nom	1900 kHz
Voltage Gain	155dB
Average Bias Current-Max (IIB)	0.0002μA
Low-Offset	YES
Frequency Compensation	YES
Supply Voltage Limit-Max	8V
Voltage - Input Offset	5μV
Low-Bias	YES
Micropower	NO
Bias Current-Max (IIB) @25C	0.00006μA
Programmable Power	NO
Dual Supply Voltage	5V
Nominal Gain Bandwidth Product	1.9MHz
Max I/O Voltage	20μV
Input Offset Current-Max (IIO)	0.00006μA
Height	5.08mm
Length	9.81mm
Width	6.35mm
Thickness	3.9mm
Radiation Hardening	No
RoHS Status	ROHS3 Compliant
Lead Free	Lead Free
Factory Lead Time	1 Week
Lifecycle Status	ACTIVE (Last Updated: 1 week ago)
Contact Plating	Gold
Mounting Type	Through Hole
Package / Case	8-DIP (0.300, 7.62mm)

TLC2654IP Overview

In the package, you will find a 8-DIP (0.300, 7.62mm)-case to contain the op amp ic. An op amp ic of the General Purpose type. A Tube case is used for delivering the op amp. A total of 8 terminations have been reported in the past few weeks. A total of 8 pins are located on this board. I would like you to keep in mind that this buffer amplifier needs to be run at a voltage of 5V. It should be noted that this op amp is a type of Operational Amplifier device. 8 pins are included on the operational amplifiers. Regarding input offset voltage, op amp rates 20μV. It is recommended that this electronic component be mounted using the Through Hole mounting type. According to the manufacturer, this buffer op amp works well at -40°C~85°C , which is a good operating temperature. It is possible to operate this buffer amplifier from a supply current of 1.5mA . Keeping the voltage gain at 155dB is the best course of action. For the operating supply voltage of the op amp ic, there is a rating of 1. The operating supply voltage of instrumentation amplifier is rated 8V voltage. Buffer op amp series numbers are indicated by the LinCMOS?.