banner_page

TLC271ACDR

30mA per Channel 0.7pA 65 dB Instrumentational OP Amps 0.00006μA 3V~16V ±1.5V~8V TLC271 8 Pins 8-SOIC (0.154, 3.90mm Width)


  • Manufacturer: Texas Instruments
  • Nocochips NO: 815-TLC271ACDR
  • Package: 8-SOIC (0.154, 3.90mm Width)
  • Datasheet: -
  • Stock: 846
  • Description: 30mA per Channel 0.7pA 65 dB Instrumentational OP Amps 0.00006μA 3V~16V ±1.5V~8V TLC271 8 Pins 8-SOIC (0.154, 3.90mm Width)(Kg)

Details

Tags

Parameters
Factory Lead Time 1 Week
Lifecycle Status ACTIVE (Last Updated: 3 days ago)
Mounting Type Surface Mount
Package / Case 8-SOIC (0.154, 3.90mm Width)
Surface Mount YES
Number of Pins 8
Operating Temperature 0°C~70°C
Packaging Tape & Reel (TR)
Series LinCMOS™
JESD-609 Code e4
Pbfree Code yes
Part Status Active
Moisture Sensitivity Level (MSL) 1 (Unlimited)
Number of Terminations 8
ECCN Code EAR99
Terminal Finish Nickel/Palladium/Gold (Ni/Pd/Au)
Subcategory Operational Amplifier
Packing Method TR
Terminal Position DUAL
Terminal Form GULL WING
Peak Reflow Temperature (Cel) 260
Number of Functions 1
Supply Voltage 5V
Base Part Number TLC271
Pin Count 8
Number of Elements 1
Operating Supply Current 950μA
Nominal Supply Current 2mA
Power Dissipation 725mW
Slew Rate 5.3V/μs
Architecture VOLTAGE-FEEDBACK
Amplifier Type General Purpose
Common Mode Rejection Ratio 65 dB
Current - Input Bias 0.7pA
Voltage - Supply, Single/Dual (±) 3V~16V ±1.5V~8V
Output Current per Channel 30mA
Input Offset Voltage (Vos) 5mV
Bandwidth 1.7MHz
Gain Bandwidth Product 2.2MHz
Unity Gain BW-Nom 2000 kHz
Voltage Gain 87.23dB
Average Bias Current-Max (IIB) 0.00006μA
Low-Offset NO
Frequency Compensation YES
Voltage - Input Offset 900μV
Low-Bias YES
Micropower NO
Bias Current-Max (IIB) @25C 0.00006μA
Programmable Power YES
Nominal Gain Bandwidth Product 1.7MHz
Max I/O Voltage 5mV
Input Offset Current-Max (IIO) 0.00006μA
Height 1.75mm
Length 4.9mm
Width 3.91mm
Thickness 1.58mm
Radiation Hardening No
RoHS Status ROHS3 Compliant
Lead Free Lead Free

TLC271ACDR Overview


Packaged in a 8-SOIC (0.154, 3.90mm Width) case, the buffer op amp is ready to use. General Purpose-type instrumentation amplifiers are used in this application. As far as the packaging is concerned, buffer op amp is delivered in a Tape & Reel (TR) case. The number of terminations is approaching the 8 mark. Buffer amplifier has a total of 8 pins. I would like you to keep in mind that this buffer amplifier needs to be run at a voltage of 5V. A type of Operational Amplifier buffer op amp is what this device is specifically, to be more precise. Linear amplifier includes 8 pins. With regard to input offset voltage, instrumentation amplifier is rated at 5mV. It is recommended that this electronic component be mounted using the Surface Mount mounting type. Regarding the operating temperature of this device, instrumentation amplifier performs well at a temperature of 0°C~70°C . Using an 950μA supply current, this operational amplifier ics can be operated. There should be no change in the voltage gain. The op amp is rated for an operating supply voltage of 1. The instrumentation amplifier is packed in the form of TR. LinCMOS? is the number that corresponds to the series of the buffer op amp.

TLC271ACDR Features


8 Pins
supply voltage of 5V
87.23dB voltage gain

TLC271ACDR Applications


There are a lot of Texas Instruments TLC271ACDR Instrumentational OP Amps applications.

  • Thermocouples
  • Differentiator circuits
  • High/low-pass filter circuit
  • Communication device
  • PDA
  • Multimedia playback equipment
  • Oscilloscopes
  • Addition operation circuits
  • Proportional counter tubes
  • Portable media players

Write a review

Note: HTML is not translated!
    Bad           Good