Parameters |
Factory Lead Time |
1 Week |
Lifecycle Status |
ACTIVE (Last Updated: 5 days ago) |
Mounting Type |
Surface Mount |
Package / Case |
8-SOIC (0.154, 3.90mm Width) |
Surface Mount |
YES |
Number of Pins |
8 |
Operating Temperature |
0°C~70°C |
Packaging |
Tube |
Series |
LinCMOS™ |
JESD-609 Code |
e4 |
Pbfree Code |
yes |
Part Status |
Active |
Moisture Sensitivity Level (MSL) |
1 (Unlimited) |
Number of Terminations |
8 |
ECCN Code |
EAR99 |
Terminal Finish |
Nickel/Palladium/Gold (Ni/Pd/Au) |
Subcategory |
Operational Amplifier |
Terminal Position |
DUAL |
Terminal Form |
GULL WING |
Peak Reflow Temperature (Cel) |
260 |
Number of Functions |
1 |
Supply Voltage |
5V |
Base Part Number |
TLC271 |
Pin Count |
8 |
Number of Channels |
1 |
Operating Supply Current |
950μA |
Nominal Supply Current |
2mA |
Power Dissipation |
725mW |
Slew Rate |
5.3V/μs |
Architecture |
VOLTAGE-FEEDBACK |
Amplifier Type |
General Purpose |
Common Mode Rejection Ratio |
65 dB |
Current - Input Bias |
0.7pA |
Voltage - Supply, Single/Dual (±) |
3V~16V ±1.5V~8V |
Output Current per Channel |
30mA |
Input Offset Voltage (Vos) |
10mV |
Bandwidth |
1.3MHz |
Gain Bandwidth Product |
2.2MHz |
Unity Gain BW-Nom |
2000 kHz |
Voltage Gain |
87.23dB |
Average Bias Current-Max (IIB) |
0.00006μA |
Low-Offset |
NO |
Frequency Compensation |
YES |
Voltage - Input Offset |
1.1mV |
Low-Bias |
YES |
Micropower |
NO |
Bias Current-Max (IIB) @25C |
0.00006μA |
Programmable Power |
YES |
Nominal Gain Bandwidth Product |
1.7MHz |
Max I/O Voltage |
10mV |
Input Offset Current-Max (IIO) |
0.00006μA |
Height |
1.75mm |
Length |
4.9mm |
Width |
3.91mm |
Thickness |
1.58mm |
Radiation Hardening |
No |
REACH SVHC |
No SVHC |
RoHS Status |
ROHS3 Compliant |
Lead Free |
Lead Free |
TLC271CD Overview
Packaging for the buffer amplifier is in the form of a 8-SOIC (0.154, 3.90mm Width) case. An op amp ic of the General Purpose type. A Tube case is used for delivering the op amp. There have been a total of 8 terminations over the past year. There are a total of 8 pins on this op amp. It would be helpful if you could remember that this op amp ic should be powered by an 5V battery. It should be noted that this type of buffer amplifier is exactly what is known as a Operational Amplifier device. 8 pins are available on the instrumentation amplifier. Regarding input offset voltage, buffer amplifier rates 10mV voltage. This electronic part is best mounted with type Surface Mount. In relation to the operating temperature of this buffer op amp, it works well at an average of 0°C~70°C . This op amp can operate from a supply current at 950μA. There should be no change in the voltage gain. The op amp ic has 1 channels on it. As the name implies, LinCMOS? refers to the series of the buffer op amp.
TLC271CD Features
8 Pins
supply voltage of 5V
87.23dB voltage gain
TLC271CD Applications
There are a lot of Texas Instruments TLC271CD Instrumentational OP Amps applications.
- Oscilloscopes
- Automotive sensors
- Switching amplifier
- Polarized electrodes
- Home audio systems
- Micro signal measurement
- Blood pressure sensors
- PDA
- Radar
- Cinema or auditorium audio system